Problem with Phoenix Bios Editor

Only for programmers and BIOS gurus with technical questions.
Post Reply
steve6386
New visitors - please read the rules.
Posts: 4
Joined: Wed Mar 14, 2007 8:39 pm

Hi,
Im having problems with Phoenix Bios Editor, the bios is an IBM Firtstbios which I can open no problem but it wont rebuild it. I make a change then reverse it just to activate the build button then rebuild, what I thought would be the same as the input file turns out to be unbootable and totally different.
Im hoping someone has some idea whats going on ?
Cheers
Steve.
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

IBM customization so no pure PhoenixBios.
edwin/evasive

Do not assume anything

System error, strike any user to continue...
steve6386
New visitors - please read the rules.
Posts: 4
Joined: Wed Mar 14, 2007 8:39 pm

Hi Edwin,
Thanks for the reply, any suggestions ?
Steve.
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

Contact IBM? I have no idea right now, I don't know what IBM did to the bioses exactly...
edwin/evasive

Do not assume anything

System error, strike any user to continue...
steve6386
New visitors - please read the rules.
Posts: 4
Joined: Wed Mar 14, 2007 8:39 pm

IBM are a waste of time, no point in contacting them as I have already found out. Back to the original aproach...see bios rebuild thead.
Cheers
Steve.
Post Reply