I have bios GB85010A.86A.0060.p18 which is the latest bios upgrade intel offers but it doesn't resolve my HD capacity issue.
I just purchased a 400GB hard drive to use as additional storage. Xp is running on a 20gb HD.
The problem is that it only says the new HD is 33+ gb?
What are my options to resolve this issue.
Hard Drive Capacity Issue
-
- New visitors - please read the rules.
- Posts: 6
- Joined: Sat Jun 23, 2007 10:44 pm
More info...hope this helps
BIOS Date: 10/08/01
BIOS Type: American Megatrends licensed to Intel
BIOS ID: 51-2300-000000-00101111-030199--GB850
OEM Sign-On:
Chipset: Intel 2530 rev 2
Superio: SMC LPC47M10x rev 1 found at port 2Eh
OS: WinXP SP2
CPU: Pentium(R) 4 1400 Mhz MAX: 1400 Mhz
BIOS Date: 10/08/01
BIOS Type: American Megatrends licensed to Intel
BIOS ID: 51-2300-000000-00101111-030199--GB850
OEM Sign-On:
Chipset: Intel 2530 rev 2
Superio: SMC LPC47M10x rev 1 found at port 2Eh
OS: WinXP SP2
CPU: Pentium(R) 4 1400 Mhz MAX: 1400 Mhz
who is 'it'?The problem is that it only says the new HD is 33+ gb?
did you already partition and format the drive? what's the size of the drive shown in windows?
resources for your board at intel:
http://downloadcenter.intel.com/filter_ ... bmit=Go%21
-
- New visitors - please read the rules.
- Posts: 6
- Joined: Sat Jun 23, 2007 10:44 pm
The hard Drive is made by Seagate and should be about 400GB.
Yes I did Format and Partition but the HD only reads a little over 33 G.B.
Yes I did Format and Partition but the HD only reads a little over 33 G.B.
-
- New visitors - please read the rules.
- Posts: 6
- Joined: Sat Jun 23, 2007 10:44 pm
What do you mean by correctly? Do you mean does the bios see the HD and the answer is yes.cp wrote:is the HDD detected in the bios correctly?
cp wrote:did you check the jumpers on the hdd for size limitation?
The way I understand the manual is that you only use the jumper if the computer freezes on start-up. Should I try this?
33816MBcp wrote:what size does windows xp detect?
I googled it and couldn't find a download link. Do you have a link?cp wrote:did you install the intel southbridge drivers?
Thank you so much.
-
- BIOS Guru
- Posts: 3153
- Joined: Thu Mar 21, 2002 8:16 pm
- Location: Near Hannover (CEBIT) Germany
- Contact:
How does the bios detect your drive ?
Does it only show 32GB too or does it show more ?
It is possible the HDD capacity limitation jumper is set as factory default, please remove it to check what your bios does now.
Does it only show 32GB too or does it show more ?
It is possible the HDD capacity limitation jumper is set as factory default, please remove it to check what your bios does now.
-
- New visitors - please read the rules.
- Posts: 6
- Joined: Sat Jun 23, 2007 10:44 pm
>How does the bios detect your drive ?
Does it only show 32GB too or does it show more ?
Maybe, I can'[t find it but my bios doesn't specify the HD size. It does have the correct model number.
>It is possible the HDD capacity limitation jumper is set as factory default, please remove it to check what your bios does now.
I tried three separate settings for the jumper setting...Factory default, capacity limitation jumper setting, and no jumper.
Each setting resulted in the same thing.
Should the partition be Fat32 or NTFS...I tried both and it didn't change anything...
Does it only show 32GB too or does it show more ?
Maybe, I can'[t find it but my bios doesn't specify the HD size. It does have the correct model number.
>It is possible the HDD capacity limitation jumper is set as factory default, please remove it to check what your bios does now.
I tried three separate settings for the jumper setting...Factory default, capacity limitation jumper setting, and no jumper.
Each setting resulted in the same thing.
Should the partition be Fat32 or NTFS...I tried both and it didn't change anything...
-
- New visitors - please read the rules.
- Posts: 6
- Joined: Sat Jun 23, 2007 10:44 pm
Anyone?
What are my other options is Bio Upgrades and Jumpers don't work?
What are my other options is Bio Upgrades and Jumpers don't work?
look, Windows XP SP2 comes with build in LBA48 support, so it does supports drives upto 144 PETAbyte out of the box EVEN THOUGH the bios wouldn't.
So as you didn't specify any harddrive model (except the maker Seagate) i assumed one. Please set your drive's jumper to master or slave and do NOT jumper "Limit drive capacity".
This picture might help:
http://www.seagate.com/images/support/e ... mily_1.gif
Now, if you've applied the correct jumper setting enter the bios, hit the drive auto-detection button and choose LBA as adressing scheme. Boot Windows and check the size of the drive. It may be necessary to remove any old partitions or reformat the drive.
So as you didn't specify any harddrive model (except the maker Seagate) i assumed one. Please set your drive's jumper to master or slave and do NOT jumper "Limit drive capacity".
This picture might help:
http://www.seagate.com/images/support/e ... mily_1.gif
Now, if you've applied the correct jumper setting enter the bios, hit the drive auto-detection button and choose LBA as adressing scheme. Boot Windows and check the size of the drive. It may be necessary to remove any old partitions or reformat the drive.