News of BIOS Utilities & Flash Programs

I have an old Elpina M571 main board. I have collected the most current drivers and the latest BIOS upgrade from the PC Chips site.

I cannot find a flash utility program that will work.

Currently the system hangs up during shut down, W98se, and all I can think of is the BIOS needs to be updated.

Any help or suggestions would be much appreciated.

At the a: prompt I get an *invalid command or file name* message when attempting to flash my bios. The flasher file is named *awdfl779.exe* and the data file *v370at13.bin*. I read somewhere that the command at the a: prompt should read *awdflash v370at13.bin*. With a space between the h and v. Am I doing something wrong? Thank you for your help.
Klaus

Is there any way to disable the memory check during post? I have an Award bios v4.51

Since the links do not work, how do I get a flash utility program for AMI Bios?

I have an old ELpina MB and have the latest revision BIOS, I just need the flash utility.

I want to write a string(or string) in bios(system bios) (between e000:0000 or f000:ffff).
How can I do this?

thanks advance

Expect UniFlash v1.27 soon. Atmel AT29Cxxx detection fixed, SiS630 with IT8705F flashing works...

Exist a way to copy a BIOS without do a upgrade, or a program??

I have old 286 board with AMI BIOS (1988) with very simple BIOS setup. There are only 45 predefined hard drive types. I can also select type 47, but I can't specify HDD parameters (I tried to use 200MB 2.5" notebook HDD but the largest predefined drive is 128MB). I guess that I need some external utility where I can enter HDD parameters.
Second problem is that there is no connector for Turbo Switch - ...

Does anybody know the proper programmer (hardware/software) for my Award BIOS? My motherboard is Iwill DBS100 Schematics and PCB will be wellcome. Thanks.

I went to the BIOS utilities page to look for a BIOS flasher and not one of the links listed there works.
Just wondering why this is?