News of My CPU isn't recognized

i have lenovo 3000-q100 and i want to replace processor intel D925 with intel core2duo E6550,when i do this,the desktop can't boot,only freeze in the first boot,i think the BIOS is locked from C2D processor upgrade
can someone help me to patch the BIOS that can support E6550 processor?

thank you very much

I have a Dell Optiplex 745, it is an LGA775 Core 2 Duo machine with 65nm 2.1GHz C2D 6400.
I tried to put a Pentium Dual Core E6300 in it, this is a newer 45nm 2.8GHz chip based on C2D. It would not post with this CPU at all. Is there any way to add CPU support into the Dell BIOS? I've already extracted the .ROM and .HDR files, but I couldn't find any utility ...

Hi i was wondering if i could modify the bios's cpu microcode to support any usage of a AMD 1090t. I have all the tools to do this but i don't have any files on the processor microcode. Would a simple microcode allow me to use this 6 core processor? BTW i don't really need the turbo option to work unless it is included in the code. I have read that some AM3 chips work ...

Hello,

I'm new here, so there's my problem:

I have Lenovo Thinkcentre M57 6395-AB5 USFF PC. Decided upgrade CPU from E2160 (M0 Core Stepping) to E8400 (E0 core stepping), as it is stated that E8400 is supported by 6395 system:

http://www-307.ibm.com/pc/support/site. ... MIGR-69254

My BIOS update version 54KT23A is the latest, downloaded from there:

http://www-307.ibm.com/pc/support/site. ... MIGR-69695

As I see from BIOS flash ...

Hello Friends,

I've installed in my Complety ASUS-PC ASUS V3-P5G33 a new CPU (Core 2 Duo E8500) and now the Board shows wrong CPU Temperature (@ startup 10°C and when running 7°C or lower).
Of course that the Fanspeed of CPU-Cooler will not run over 1000 rpm and the Cooler will be very Hot.
I've already installed the newest Bios from ASUS Downloadpage (V-P5G33 0702 Bios) - The ASUS Homepage says that this BIOS supports ...

I am having some trouble because I have like no idea on how to enable my hyperthreading or install my second cpu. But I already set my ACPI to Multiprocessor in my Device Manager, but that didn't help for me at all. And I only have 1 Cpu graph showing in my Task Manager right now. But what I really want is 2 Cpu graphs to show up in my task manager a lot! I ...

I need to modify the Compaq bios for this CPU. It is CPUID 0F29 2E... Intel P4M 2.6 gHz - SL6WZ. The box utilizes a custom 50 Watt PSU. This is the best processor I could find at 35 Watts consumption. I have the latest compaq bios as well as a bin file made with uniflash 1.40. Any help would be appreciated.

Need microcode and help accessing bios file. Or if someone can to do ...

How to overclock the cpu the right way? So I overclocked my cpu (AMD Phenom II x4 955 Black edition) to 3.6Ghz @ 1.3v. Just wanted to ask if 1.3v is ok with 3.6Ghz(200x18). Do I need to increase it a bit?

hi i'm wanting to Upgrade my Pentuim 4 2.4ghz to a 2.8ghz or higher.

i know i need to update my Bios but i can't find the updates
my Mother board is a Gigabyte GA81-R but it's not listed on Gigabytes site.
the Bios string is
04/24/2002 i845 6a69VGoic-00

do i need to change the bus speed before changing CPU's?? or should it be a straight swap over??

i did try once but i think ...

Hi everybody,
I am new to the forum and really hope to solve my problem here.
I own a old laptop and I've just changed it's processor from an Celeron M410@1.46 Ghz to a Intel Pentium Dual Core T2060@1.6 Ghz. My problem is that the CPU is not properly recognized, it is assigned as a Celeron by the Bios and runs at 800 Mhz (6x 133bus). In windows it is seen as 2 processors by ...