News of My CPU isn't recognized

Hello (again) friends. :)

I want to upgrade my CPU without changing mobo.

I want to replace my AMD K6 233MHz to a faster AMD K6-3 450MHz.
I don't know what's the maximum CPU speed I could get away with, considering my mobo is a few years behind, but I read that 400 or 450MHz is not impossible.

I just need some hand holding...

Specs:

Mobo Mfg ...

Is there an upgaded or compatible BIOS for the Acer V30 mainboard?

ACR9AE00-I05-950323-R01-I0

According to Acer, the SOCKET-5 with an Intel Pentium 133MHz CPU must upgrade the BIOS with

V2.0R01-N9

The web page they direct you to to obtain the upgrade no longer exsists.
I noticed that the Acer V30-II version is ....R01-N7. I'm willing to even try it if its possible to obtain.

I am just wondering I have a GA-7Zm Rev. 2.21 motherboard.

Does anyone know if this board can accept Duron Morgan processors?

Thanx
Ryan

I have just put together this abit KT7a with an AMD XP 1800 processor and when I boot up, I get checksum error, so, I go to the bios, do nothing (except save and exit), but upon exit the system will not boot at all.

I've tried flashing the bios to a version that (per Abit) is specifically meant to support the xp 1600 thru 1900, but I get the same result.

It almost seems ...

Hello, My motherboard is the Biostar M7VKB. I dont know the maximum DURON processor speed... and I really need to. I checked the official biostar website www.biostar-usa.com and it told me two different things. One table told me that the max DURON speed was 950 MHZ. When I clicked on the link and it took me to the official web site for that motherboard it told me that the ...

The board lists 2.5v with 1 jumper on 5-6. If I remove all jumpers might I get lower, as in around 2.0-2.4v? If I could get it a smidge lower I might be able to run a k6-2 processor. Also is there a newer bios than June 1997?

If there are any good sites with this board besides Aopen itself please share.

Thank You
Ryan

can my pcchips 810lmr board take a duron 1.2ghz and can it run on a 300watt power supply. Another question i had a duron 800 will i need to by a new fan to run the 1.2ghz thanks.

Hi I have a pcchips m575 mobo with a K6 233 mmx cpu, but it will not
boot with the cache turned on in the bios unless I switch the clock to
133 Mhz. It has the latest bios update, I wouldn't even have upgraded
but the original was corrupted somehow and I had to use boot block.
BTW I am using 72 pin simms, the friend that had it before had dimms, I
don't ...

from the post above ...stating that the core voltage can be switched on the voltage regulator...it sounds like any of the faster celerons celeron2's will work if you switch the voltage...how's that done????

here is the info from the manual...please read this about the CPU's accepted and about the core voltage as well as the Bus speeds....
it sounds like it will accept virtually any Socket370 CPU...Please explain what the deal is here....because I just don't understand.

Thank You


Intel 810 chipset includes a CPU interface controller, integrated memory
controller, integrated power management unit, concurrent PCI (PCI v.2.0,
2.1, 2.2), 3D video, IDE and ISA bus controller.
n ...