News of My motherboard is dead

After using a windows flash tool from sapphire, the board does no longer boot. It even does not enter the BIOS screen or shows any video.
On power-on, the POST code jumps around like crazy. It looks like a corrupt BIOS. The system seems to hang during startup.

I don't know of any recovery BIOS. Do you know other tricks to fix it?

Regards,
klaus.

My 9 year old 2002 Medion PC MT6 computer has stopped working and every time i replace a part, another needs replacing. The MD5000 V1.0 Motherboard needs replacing. anyone know any equivilents? Please help!!! :mrgreen:

Hi
I've tried to flash my Gigabyte mainboard BIOS with @BIOS Windows utility. This is on a Dual BIOS board and I was flashing the main BIOS. Sadly, update failed on 50%. This is perhaps because Gigabyte forgotten to solder BIOS Write Protect jumper and I assumed (falsely?) that no jumper=no protection.
Anyway, PC would now start, show memory count screen correctly, say about corrupt NVRAM and prompt me to press F1 or Del. After ...

Hi. I have a Ricoh IT2 motherboard, which I did a bad bios update. Now the motherboard turn on only with a video card on pci bus. I need a bios file from someone who has such a motherboard. Mention that over the BIOS chip(SST), on a label, write DSLM6226. I am able to flash the bios with a programmer. THANKS.

Hey, the other day I tried to update the BIOS and crashed, now when I turn on the pc the screen is black. I think the only solution is to do a BIOS recovery, I've done some research but only found BIOS recovery's instructions for other machines, pc specifications:

Compaq Presario SR5612PT
CPU: AMD Athlon 4450e
RAM: 2GB pc2-6400/DDR2
ROM: 320 GB SATA-3G
Graphics: NVIDIA GeForce 6150SE

The motherboard I think is the M2P61PM-HM (because ...

I managed to corrupt my Phoenix bios. I get a dead screen, audible post beep indicating check-sum error and
the boot block firmware is activating the floppy (yes.. an old floppy) drive awaiting a recovery disk. I made
a bootable floppy using a version of Phoenix Crisis recovery, but it doesn't work. I am not sure whether my
bios files are in the proper format. My version of bios is in the BIOS.ROM and PLATFORM.BIN ...

I have that mainboard.ı upgraded bios on windows.ı think ı did a mistake because pc don't open.I want upgrade bios with award.exe but floppy don't read the disk.
what can ı do?

Hi All,

I will detail all problems then we can see if anyone can help once they have the full story.

I have a GA-8i915PM Rev 2.0 from a Packard Bell machine. The BIOS was corrupt and would not POST. Hangs at logo flash screen.
I searched in vain for a packard bell BIOS the board, contact support at PB (Via Phone and Support Request), still no BIOS

I established that Gigabyte also made an ...

My problem start's with my hard drive 80gb only recognize 30gb i also change the jumpers but without sucess so i research on web and i find out that i have to flash my bios "AWARD MODULAR BIOS V 4.51PG" to my motherboard "SHUTTLE HOT-661V" so i find out on this website the update to my bios http://wims.rainbow-software.org/index. ... 0&count=40 i put the files on the diskette the AWDFLASH ...

Hi the other day i flashed my ECS NFORCE 570 SLIT-A (V5.1) with the bios for NFORCE 570 SLIT-A (V3.1) by accident and now all i get is a black screen. My floppy drive spins but it doesnt read anything. i do get beeps if i remove memory and my video card fan slows down like normal but it doesnt post. I tried making a bootdisk and try to fix it but it doesnt seem ...