It is currently Sat May 26, 2012 10:25 am

News News of RAM compatibility with BIOS

Site map of RAM compatibility with BIOS » Forum : RAM compatibility with BIOS

Is your memory not fully recognized? (Intel VX chipset Memory recognition)

128meg DIMM recognized as 32meg one

I have a P5VX-BE Rev:3.0 motherboard wich supposedly supports up to 256MB RAM. BIOS is Ver 1.4a from 05/12/97.

I upgraded 4 16meg SIMMs to a 128meg PC100 DIMM. On boot it recognizes only 32MB :?:

Any idea how can this be corrected? I saw a version 1.4h of BIOS, do you think flashing it might help?

I am kinda reluctant to do the flash thing: I ...
Read more : 128meg DIMM recognized as 32meg one | Views : 3155 | Replies : 14


Problems with Lucky Star 6va693am

Hi, i can't install a ram module of 512 mb in my motherboard.

The bios is: 03/19/2001-693A-686A-6A6LGL1QC-00
and the bios oem signon: 6VA693AM(S)-F3

The system only recognize 256 mb.

Why?

Thanks, and sorry for my English. I'm spanish.
Read more : Problems with Lucky Star 6va693am | Views : 4724 | Replies : 4


Upgrading RAM from SIMMs to DIMMs - Advice req.

Hello friends. :)

I want to upgrade my RAM without changing mobo.

I want to replace my 2 x 32M EDO SIMMs (60ns) with 1 x 256M or 2 x 128M DIMMs. Chips must comply with the specs below. I may want to put them in a new PC in the future, so I'd like the new RAM to be the most performant, while not crashing my ...
Read more : Upgrading RAM from SIMMs to DIMMs - Advice req. | Views : 2271 | Replies : 7


RAM PROBLEM

I recently installed 512 megs of ram on my sysytem. I know that my motherboard can handle a 512 stick, and a 256, but i dont know if it can handle 628 megs total. The reason i dont think it can handle it is because when i try to do anything with all 628 it gives me a low memory warning and freezes. I was wondering if any one can tell me if it might ...
Read more : RAM PROBLEM | Views : 2972 | Replies : 7


chaintech 6btm RAM-Bios problem

Hi 'vrybody,

Just got meself a new 256 mb dimm module for my chaintech 6btm. Motherboard booklet says 256 mb dimm compatability can not be guaranteed. Friends say I need a new bios, but I cannot find a more recent one than I've got (not on the chaintech site). Maybe somebody got a new or an alternative one somewhere or knows a solution?

my bios string:

08/17/2000 - i440BX-w977tf-2a69kc39c-00

many thanx in advance,
Thias
Read more : chaintech 6btm RAM-Bios problem | Views : 2286 | Replies : 6


Lucky Star 6vabx2 Ver. 2.0 256MB SDRAM Support troubles

Hi, I tryed to upgrade my computer from 64 MB to 64MB + 256MB. But my 256MB DIMM calculated as 128 MB RAM. Last updated BIOS version is :
08/24/1999-692-596-W977-2A6LGL1AC-00.

It was upgraded from http://www.lucky-star.com.tw but for LS6VABX2 VER 1.0. BIOS for Ver 2.0 did not accepted by awdflash.exe.

what you can advise me?
Read more : Lucky Star 6vabx2 Ver. 2.0 256MB SDRAM Support troubles | Views : 2105 | Replies : 1


Ram upgrade not working, BIOS?

:? I am running a PCchips 572 board which has 4 simm slots and 2 dimm slots. I've been running 64 MBs of ramm in the simm slots 16 MB a piece. Purchased 128MB dimm popped it in took old out and nothing happened. Took one 128MB and still nothing. Blank screen death no CMOS boot no nothing. Did the hookie pokie and switched the ram around ...
Read more : Ram upgrade not working, BIOS? | Views : 3110 | Replies : 6


RAM or BIOS problem

Dear Wim

I Have a PC Chips M571 motherboard AMI BIOS v1.xx (dated 1998). It has 32MB SDRAM DIMM, don't know the clock speed.

I have just bought a 128MB SDRAM DIMM PC133.

At boot it counts up to 160MB then hangs.

Will a BIOS upgrade cure this problem?
Read more : RAM or BIOS problem | Views : 2569 | Replies : 1


SD-Ram

I'm looking for the right specifiacations of the SD-ram, supported by this motherboard :
American Megatrends Inc.
51-0505-001437-00111111-071595-M1531/43-001_10_-H
Amibios (C)1996 Release 26/11/1997 S

I don't find this motherboard on websie of AMI.
If somebody could find me the manual and/or the exact type of SD-ram.

I bought 2x64 MB SD-ram PC100, but actually there's a difference in models, cause I can't click it in the bay's (sorry, I don't know the right term in English, ...
Read more : SD-Ram | Views : 1910 | Replies : 2


 

Login  •  Register


Statistics

Total posts 54745 • Total topics 10742 • Total members 9516