News of RAM compatibility with BIOS

SIS wikipedia indentified this board as sis 530/5595 (sindbad) socket 7 66-124Mhz bus 2-8mB shared AGP sis 6326 3D

Start up screen bios string AMI 1-10-200s 52-0110-001437-00101111-071595-000000-001_v90_5670-h

Using this, hardware archivist Edwin indicated this board was a PC Chips (hsin tech) m599lmr.

A quantity of data including the manual can be found at http://virtual-concepts.net/drivers/pcchips/m599lmr/

Not all ram compatibility is listed. Does anyone know if ecc ram will work with ...

I have an EMachines 5230 PC from PC World, which has 1Gb of RAM in it (2x512Mb) working fine.

Since it has only 2 slots, I bought 2 x 1Gb modules so I could upgrade to the listed 2Gb maximum for the motherboard.

The 1Gb 2700 modules are both working fine, but only in the righthand slot and, if a 1Gb is in the righthand slot, nothing will work in the lefthand slot, so basically ...

specs

MSI MS-7032-02 K8T Neo-V AMD Athlon 64 Socket 754 Motherboard
Crucial 1gb RAM, pc3200 DDR, non-ecc (only ram chip installed)

the result is always the same - bios and windows recognizes it as 256mB

I'm getting the feeling it's a chipset density limitation, however - as stated by the specs for my mobo, it should be able to handle this chipset density


btw, it recognizes all of my old 512 pc3200 ddr ram chip ...

anyone know how to disable x40 onboard ram tru bios?

i try (how to disable the internal memory in CMOS for the TP600E and 600X ) but it didnt work.

have anyone try to disable onboard ram on x40?

the on board ram is damage already, alway get the BSOD.

Hi!

I have a Gigabyte GA-586TX3 (latest BIOS 2.1) with 430TX chipset and 3 DIMM slots and 2 SIMM slots.

The manual says I can install 256MB RAM (2 x 128MB SIMMs). Currently, I have one 256MB Dimm in the DIMM 1 slot installed, and the board functions great, even though the manual says it can only support 64MB DIMMs.

When I install another 128MB DIMM, it isn't recognized. Is this a hardware or a ...

I have newly purchased PQI 2x512mb sticks. when installed together I get BSOD after couple of minutes. I tested the memory individually and they are good. Is there any bios update for P4s-LA Asus motherboard.
My PC config is
HP Pavilion 750 CTO, DDR266, PC2100, two memory slots for 2gb maximum
Board: ASUSTeK Computer INC. P4S-LA REV 1.xx
Bus Clock: 100 megahertz
BIOS: Award Software, Inc. 3.04 02/09/2002
Thank you.

In short, i need to set Read Preamble timing manually in bios setup (or even flash fixed value).

The whole story, u may skip it. Damn mobo sets RP to useless 9 ms, my memory (ddr400 of course) cant go past 135 (270ddr) frequency with such crazy setting :evil: (common working values are about 4 to 6 ms) This only happens at higher FSB's, ...

Yesterday when i turned on my PC, heard two beeps coming from my PC. What do they mean? I have a Pheonix BIOS chip. here are some other information you might need:

Brand name: HP
Model number: Pavilion a210n
Primary HDD: Western Digital 160gig (Upgraded from Maxtor 80gig)
Secondary HDD: Seagate 100gig (Add on)
Primary optical drive: Samsung DVD-ROM
Secondary optical drive: I/O Magic DVD-RW (Upgraded from CD-RW)
CPU: Intel(R) Celeron @ 2500 Mhz
Memory ...

Hi ,
My mother board is AMIBIOS(C)1996 ZX98-ATVER1.09(991216)
running PIII 500 Mhz.
I have 64+64 MB SDRAM installed on 2 slots.

I'm planning to upgrade to higher RAM
Whats the MAX capacity..? Is it 256MB and if yes can I install 1 single 256 MB SDRAM stick...?
Please let me know

Also , I plan to connect a higher capacity HD...80GB ATA.
Do I need to upgrade the BIOS? Where can I find the utility? ...

i have Acorp 6A815EPD motheboard. It have max 3 ram slot and menual allow max 512 ram in all slots of system system. This mean that you can not increas ram more then 512MB . Weather you use a single 512MB or (128+128+256=>512, 256+256=>512). If i used three 512MB ram in three slots bios dos't identify other two rams. It show and work only 512MB ram. How can i remove limits of 512MB to 3GB ...