Stickies

The Latitude CP and CPiD have the same exact motherboard but the bios determines whether or not you can have a Pentium or Pentium II. By flashing with the TR4 bios (a OEM bios) you can make it run in Dual mode. Simply install your Pentium II MMC-1 processor and boot up and then flash with the latest CPiD bios.

The CPxH/CPtV do not support Speedstep Pentium III processors. If one is installed, they will ...

If using Uniflash to flash a mainboard's Bios you might get a "Bootblock Mismatch" error message with the option to continue flashing or not
Do not continue flashing !!
> It may render your Bios useless or (with luck)the board starts with emergency Bios (Bootblock Bios)

Make sure you have the correct Bios !

If you get this "Bootblock Mismatch" error message do not continue flashing - go to Uniflash Advanced menu and use the ...

http://oldman.ixbt.com/mb/