News of Video (VGA) and other BIOS/Firmware

Hi there,

I hope this post belongs to the correct topic ...

My system is a desktop FSC Scenic P300 with a D1561 mainboard. The currently installed BIOS is a "Phoenix cME FirstBIOS Version 5.00 R2.14.1561.01"

My problem:
I tried to install a better videocard (AXLE 6600GT AGP 512MB GDDR2 RAM/128 BIT). Therefore I already installed a new power supply with 360Watt, which works perfect - but the BIOS doesn't accept the videocard (1 long ...

Hello,

I have an ASRock 4CoreDual-VSTA board with which I am quite happy. I have been using the modded BIOSes from pc-treiber-dot-net in order to upgrade to newer processors and RAM, plus access additional options in the BIOS settings.

Their most recent BIOS for my board (2.39a) added support for the ATI-AMD 4000 series. The board has a Gen1.0 PCIe video card slot. My understanding is that newer cards from NVidia and ATI would require ...

Hello!
I'm trying to update my VBIOS to get the correct resolution.
LINK of my motherboard driver:
SUPPORTFOXCONNSITE/models=en-us0000273&category=C000000001&series=en-us0000001&keywords=&sort=BIOS
"Your post looks too spamy for a new user, please remove off-site URLs."

DATA:
Motherboard: Foxconn 650M02-G
Chip SET: SiS 650GX

My problem is similar to this one:
www.wimsbios.com/forum/topic10020.html

I'm gone to this page and it says if don't have my motherboard patched bios to request on the forum:
...

i recently purchased a adapter that goes from vga to video/s-video out and it does not work with my computer. when i hook it to my tv i get 3 images of the desktop all in black and white. is there a program i can download to help me? or do i need another video card to support this?

I recently designed a software application to run on a personal computer running windows 7. This computer has another monitor connected to it through a vga cable. Everytime now I power it up, all I see on monitors is no signal message in the centre of the screen. This is really what my customer has reported to me and I am going to look at the problem tomorrow. Customer knows basics about computers and I ...

I have AGP card NVidia 6600, but 2 capacitors blowed up and now I am waiting for their exchange.
I now that there's no support for resolution bigger than 1440x900, but I can't set 1440x900 resolution, maximum wide screen resolution is 1280x720.
Can I set 1440x900 resolution in some way?

Hello,

I bought a 21.5'' Dell u2211h lcd monitor but I can't set normally wide screen resolution on windows (1920x1080)- the screen is cutted on the right and bottom side. Now I work on 1280x1024 resolution, but the screen is stretched and look ugly. When I set 1440x900 monitor menu show 1280x720. When I set 1920x1080 monitor menu show 1360x768. Monitor connect through D-SUB. Only When I set 1280x720 monitor menu show also 1280x720 and ...

I need patched bios for this motherboard: ASUS A7V400-MX SE

The bios version installed on the motherboard is A7V400-MX SE Bios version 1001
The link for download > http://dlcdnet.asus.com/pub/ASUS/mb/soc ... v4se01.zip

I'm looking forward for new widescreen patched bios. Thanks in advance..

I have a small problem I was hoping someone could help me with.

I am trying to setup Linux on my old machine, but I am having a video issue. The motherboard is a Jetway NF-91-600LF board, which is based on an Intel 915 mobile chipset. The integrated graphics is an Intel GMA900.

The problem is, this chipset has built in capability to support an LVDS (laptop display) along with a VGA monitor. The motherboard ...

After having problems with my pc (processor speed) i was advised to update the bios. Since doing this i can no longer see the 2nd graphics card, can anyone help please?

Previously i had the following set up:

Windows Vista 64 PC with 3 monitors on 2 graphics cards (GeForce 8200 & GeForce 9500GT)
Motherboard- ASRock K10N78-1394
Chipset- GeForce 8200
Bios- American Megatrends P1.20
CPU- AMD Phenom II X4 955

My PC has been sluggish ...