News of Where can I find a motherboard manual?

Hi!

I've searched everywhere and cannot find a manual or anything that would tell me which Jumper on my Chaintech 7vil3 sets the CPU Frequency.

I upgraded my processor and cannot find my manual (suck!). I'd like to set it to 133Mhz, but trial and error has gotten me nowhere.

If anyone has this motherboard or any advice or direction I would really appreciate your help.

Thanks!

Michael

My board has:
3 sockets isa
4 sockets pci
4 sockets simm 72 pins
2 sockets dimm 168 pins
Chipset Intel

pciset
SB82437VX
L72124360
sU116

pciset
SB82371SB
L7114649
su093
intel

socket 7 for the cpu (pentium 166 MHz)
AT connectors.

I want find the manual?

Thanks

Hi all
I am looking for a manual/or just info for the jumper settings on the board to clear the CMOS battery for a OEM modified uniwill 257SA0 situated inside a Fujitsu-Siemens Amilo D 1845
Thanks to NickS for the info

I recently tried to flash a bios from the above link which appears to be incompatible with the board, or just didn't successfully complete.

I appear to get power on my motherboard (power led ...

:?: :?: :?:
I have a motherboard that on back is write: Elpina BA E - VO 9820.
I need the manual and drivers if its exists.

I know this is a PCChips motherboard and I try
- http://go.to/ajz
- http://go.to/th2 ...

How can i find out what AGP i have without knowing the motherboard?

Hello,
I search the manual for my COMPAQ PRESARIO 2292 with jumpers settings
Please can you help me to find .

Hello,
I have a main board wich is Acorp menufactured so i want's it's menual.
I try download from Acorp web site but all in vain. This site was removed.
So where from i download it's menual and bios update.

Tried google and found some site's with lucky star manuals (http://www.elhvb.com/mboards/luckystar/manuals), but not for this motherboard...
Thanks in advance...
deneut_tijlhotmail.com

EDIT: My sinsere appologies for the wrong topic title, the right mainboard nr is 6VMPLET Rev1.0

I need a Manual for this motherboard. It's a K7 slot A board with 5 PCI slots. It has no ISA slots. It has three Sdram slots but only two recognise memory.
The board was made by Asus and liceinsed to H.P. It runs a version of PhoenixBios 4.0 J2.0 Rel 2.0
The board runs with the Pand_200 upgrade but won't recognise the Pci cards in slots 2-3-4-5.
The Pavilion web site is very large ...

Model is Matsonic MS8158EC