Board index Do you have a BIOS problem? My motherboard is dead Acer Aspire L3600

Acer Aspire L3600

Hot-swapping and Boot-Block flash & Boot block flash and floppy support
Post Thu Aug 07, 2008 11:42 am
tomasvilda New visitors - please read the rules.
Recommended by Wim's BIOS... BIOS Agent scan: Upgrade your BIOS! Driver Agent scan: Instant Access to 116,215 Device Drivers Updates!

Post Thu Aug 07, 2008 11:42 am
tomasvilda New visitors - please read the rules.

Posts: 1
Hello,

I have tried to upgrade BIOS, but now it's not booting.. then one company tried reflash the same bios I have tried to put, the same.. And I don't have original bios version. Maybe some one could help?

Regards,
Tomas Vilda


Post Thu Aug 07, 2008 1:30 pm
edwin User avatar
The Hardware Archivist

Posts: 5772
Location: Netherlands

Where did you get the bios from, what method did you use to flash, is there still any warranty left?
edwin/evasive

Do not assume anything

System error, strike any user to continue...

Post Thu Sep 18, 2008 12:32 pm
ingrambr New visitors - please read the rules.

Posts: 4
I too tried to update the bios on my L3600 and have ended up with a broken box. I obtained the new bios R01-B0 from the Acer website: http://support.acer-euro.com/drivers/de ... l3600.html. Now when I turn the computer on there is a long beep followed by a short beep and nothing happens. The bios seemed to perform well, it wasn't until I rebooted that problems arose :-(

I e-mailed acer and they said "This would be classed as a chargeable repair, as flashing the bios is at your own risk." so the machine being in warranty or not doesn't seem to matter.

I opened up the machine. There are 3 pins, with a jumper on the connection of the 2nd and 3rd pins. It is marked CMOS1. In the past I've had machines with motherboards where a bios flash can be fixed with a jumper setting. Anybody got any ideas how I can fix this? I've already heard that the bios can be updated by inserting a CD with the Bios file on it.

Any information would be gratefully accepted!

Post Mon Sep 22, 2008 9:12 pm
groucho New visitors - please read the rules.

Posts: 2
Not really a response, but another question!

I need to open up my L3600to install a memory upgrade. Was it difficult opening up the case? What's the procedure?

Looks like I have to break my warranty seal to open the case...

Post Mon Sep 22, 2008 9:22 pm
ingrambr New visitors - please read the rules.

Posts: 4
Dead easy. Okay, so you need to break the warranty seal. I peeled mine off quite easily and replaced it without it looking obvious. There is one screw below the warranty seal. Undo that, and the lid will slide off. Then there is a screw in the middle towards the back of the box (if it's laid down flat). Remove that screw then grab the handle and gentle lift. Below the disk drive/cd drive chassis is a place for the memory.

Post Mon Sep 22, 2008 9:28 pm
groucho New visitors - please read the rules.

Posts: 2
thanks for the quick response!

hassle not having any user guide from Acer for this machine...

Post Wed Oct 08, 2008 11:58 pm
ingrambr New visitors - please read the rules.

Posts: 4
Sorted my problem now. It seems like it was a bad flash. I replaced the bios chip with one programmed from www.bios-repair.co.uk . The bios chip is under the CD drive, front right of the machine and can be easily removed. The bios repair service was cheap, fast and it worked perfectly after that.

Post Fri Nov 21, 2008 12:24 pm
Mastro Geppetto New visitors - please read the rules.

Posts: 1
ingrambr wrote:
Sorted my problem now. It seems like it was a bad flash. I replaced the bios chip with one programmed from www.bios-repair.co.uk . The bios chip is under the CD drive, front right of the machine and can be easily removed. The bios repair service was cheap, fast and it worked perfectly after that.


Hi to you all mates.
Can some one help me ? I need this version of bios R01-A0. When I flashed the R01-B0 my L3600 died.
Thanks in advacne.

Post Fri Nov 21, 2008 1:06 pm
ingrambr New visitors - please read the rules.

Posts: 4
How are you going to flash the R01-A0 if someone sends you it if your L3600 is dead? My computer died when I flashed the R01-B0 too. I had to get a company to flash a chip with the bios from the website. It works fine now with R01-B0... (and flashing from DOS rather than Windows seems to work) except that I think I shafted my soundcard somewhere along the way because I only get SPDIF output, nothing from the other analogue ports. In the bios it now says that my computer is a Veriton L460. If anyone has any ideas how to fix this then let me know.

Acer support are useless.

Post Fri Nov 21, 2008 9:30 pm
asus 1 acer 0 New visitors - please read the rules.

Posts: 3
Bad flash for me too on an acer aspire l3600. I think it is really poor that acer don't include any instructions for flashing the BIOS despite allowing it to be downloaded. It is also made more difficult because there is a zip file within a zip file! Acer support are useless and have a terrible attitude. The lessons i have learned:

Extract all files, including the zip file within the zip and do not flash from Windows. (burn the extracted files to a CD (Bootable) and reboot)

If the flash fails don't give Acer support the satisfaction of telling you that your board is dead and needs replacing and how its not covered under the warranty because you shouldn't have flashed it in the first place. Try the bios repair option in previous posts.

Buy a board with more features and with better support, there is very little you can do within the bios settings pn the L3600, no fan speed control for those ridiculously noisy fans!! Perhaps i have been spoiled with Asus mobs. I will never choose Acer again

Post Mon Nov 24, 2008 11:40 pm
asus 1 acer 0 New visitors - please read the rules.

Posts: 3
Bad news, received my bios chip back, installed but still a black screen. Different beep code though, two short beeps?

Can anyone help please?

Post Tue Nov 25, 2008 12:22 am
asus 1 acer 0 New visitors - please read the rules.

Posts: 3
Working Now!. Cleared the CMOS and this seemed to do the trick. I definately recommend www.bios-repair.co.uk, very helpful and a very quick response time.

Post Thu Apr 08, 2010 12:21 pm
aewen007 New visitors - please read the rules.

Posts: 1
I've opened my L3600 I've lifted the CD moved the Bios Battery But How do I remove the chip. It seems pinned to the board. No obvious clamps.
Thanks

Post Thu Aug 05, 2010 9:55 am
Infected24 New visitors - please read the rules.

Posts: 1
Oh crap, if i just had read this before trying to flash the bios using windows... :cry:

Now i have a bricked machine: it turns on but no video, just two beeps (one long- one short) I used to have R01-A0 bios version and tried to update to R01-B0. i am going to try the bios-repair.co.uk method. I hope i can get Analog Audio work, its vital for me.

Cross finger to get it work back again. :(

Re:

Post Mon Mar 26, 2012 6:17 am
ld.rireal New visitors - please read the rules.

Posts: 2
ingrambr wrote:
Sorted my problem now. It seems like it was a bad flash. I replaced the bios chip with one programmed from a bios-repair store. The bios chip is under the CD drive, front right of the machine and can be easily removed. The bios repair service was cheap, fast and it worked perfectly after that.



How do you remove the chip?. It seems pinned to the board. No obvious clamps.
Thanks in advance.

Recommended by Wim's BIOS... BIOS Agent scan: Upgrade your BIOS! Driver Agent scan: Instant Access to 116,215 Device Drivers Updates!
Next

Return to My motherboard is dead

 


  • Related topics
    Replies
    Views
    Last post