Jetway 966PDAG Memory rempap setting missing

by **rjkruit** » Fri May 08, 2009 7:41 pm

Hi Guys,

I'm Rob Kruit from The Netherlands and I found this forum googling for a problem with a motherboard I just bought.

I wanted to build a VMWare ESXi server with 8GB of RAM so I got this Jetway 966PDAG at a discount. Since it has a 965 chipset it should support 8GB's of ram. I installed 4x 2GB modules of ram and the bios reports the memory correctly. However VMWare reports only 3.2GB of ram and so is 64 bit Windows Vista. I know this is a memory remap issue but I can't find this setting in the award bios so I think it's hidden. Is there any way to unhide this setting?

by **edwin** » Fri May 08, 2009 11:25 pm

Manual:
http://www.jetway.com.tw/jw/download_ad ... h&isbios=0

Latest BIOS:
http://www.jetway.com.tw/jw/download_ad ... ntype=BIOS

Flash utility:
http://www.jetway.com.tw/jw/download_ad ... =Utilities

The support page for this board says it supports 8GB. If it is there, the remap setting is found here:

Advanced => Chipset => North Bridge Configuration => Memory Remapping Feature

by **rjkruit** » Sat May 09, 2009 9:37 am

Thanks but I allready flashed the board with this bios. There is no North Bridge Configuration menu in this bios. I think it's hidden or disabled.