Board index
Login
Register
Search| Recommended by Wim's BIOS... |
|
|
Board index ‹ Do you have a BIOS problem? ‹ RAM compatibility with BIOS ‹ P6IPAT
Fri Feb 14, 2003 2:04 am
Hi all
Past upgrade bios form 1.1c to 1.1d , my motherboard dont recognize 128 and higer memory a must put memory (256) with 32 or 64 in to socket ( first socket 32 or 64 MB SDRAM) when i load defaults (setup or bios) and safe , reboot past update ESCD and DMI data i can normally get my 256 MB memory a lone I used Winflash 1.28 with bootblock programming and clear options (CMOS DMI ESCD) Every time when I clear CMOS with jumper I have this sytuation Would you help me ? Thanks for answer
hardware : mainboard P6IPAT bios version 1.1d with firmware hub W49V002
at i815 chipset
P6IPAT
2 posts
• Page 1 of 1
Fri Feb 14, 2003 2:04 am
Past upgrade bios form 1.1c to 1.1d , my motherboard dont recognize 128 and higer memory a must put memory (256) with 32 or 64 in to socket ( first socket 32 or 64 MB SDRAM) when i load defaults (setup or bios) and safe , reboot past update ESCD and DMI data i can normally get my 256 MB memory a lone I used Winflash 1.28 with bootblock programming and clear options (CMOS DMI ESCD) Every time when I clear CMOS with jumper I have this sytuation Would you help me ? Thanks for answer
hardware : mainboard P6IPAT bios version 1.1d with firmware hub W49V002
at i815 chipset
Rainbow help me you're my last chance 
| Recommended by Wim's BIOS... |
|
2 posts
• Page 1 of 1