Manual for MSI 6154 and Shutle 687Z needed

Recommended by Wim's BIOS...

by **aztech** » Sun Apr 20, 2003 10:02 pm

Please, don't send me to get MS 6154VA manual (as it is located following the link on msi.com.tw). And as regards Shuttle, there's 1.3 Mb broken archive (instead of 9MB) on it's ftp...

by **edwin** » Sun Apr 20, 2003 10:44 pm

Shuttle HOT-687Z FAQ:
http://www.spacewalker.com/english/faq_e/687z.htm

What chipset does your MS-6154 have then and what system is it in?

by **aztech** » Mon Apr 21, 2003 12:12 am

spacewalker directs to ftp, where shoud be a 9Mb file, but there's only 1.3Mb and winzip reports it as broken archive...
6154 has got Intel ZX chipset, while 6154VA has VIA one... They look much alike each other but there are minor differences I'm interested in... As to the system it is installed in... It is damaged, I'm trying to repair it. :-)

by **edwin** » Mon Apr 21, 2003 12:23 pm

As to the system it is installed in...

brand and model please.

by **edwin** » Mon Apr 21, 2003 12:48 pm

MS-6154 ver 1.0 manual:
http://www.msi.com.tw/program/support/m ... ME=MS-6154

MS-6154 ver 1.0 BIOS:
http://www.msi.com.tw/program/support/b ... ME=MS-6154

Looks like there has not been any development after the initial product release, whatever limts you are stuck with now (apart from harddisk size limit perhaps) you'll have until eternity...

I have emailed Shuttle support about their file corruption problem.

by **aztech** » Tue Apr 22, 2003 2:14 pm

The file you point is e6154va.exe and it is for 6154VA MB (VIA chipset), but not 6154 MB (ZX chipset) I needed...

by **edwin** » Tue Apr 22, 2003 10:02 pm

argh! thank you msi for making me look like s**t :roll:

Alrighty, maybe you can give us the brand and model of the system that MS-6154ZX is built in, maybe we have better luck at the system builder...

by **aztech** » Tue Apr 22, 2003 10:29 pm

It was sold separately as a component part for assembly. It came to me in the most OEM form. Just board... :wink:

by **edwin** » Wed Apr 23, 2003 6:38 pm

I don't get it, it is almost as if they want to deny ever making it or they have somehow lost the manual. Have you emailed Microstar tech support?

by **aztech** » Thu Apr 24, 2003 12:06 am

I tried, but no reply.... :roll: