Ms6353(fujitsu-siemens)

Recommended by Wim's BIOS...

I have searched your forum and many others for this elusive bios, so now I post the question, Where can I get an updated bios for this board?
Fujitsu-siemens and Msi both will not respond to repeated e-mails and phone calls, so here I am with this Jetson@home computer (mobo at least)
with no way of getting an upgraded bios or cpu support. I get nothing and it is all free of charge.
Sorry for ranting not the time or place, but I am truly at my wits end.
It is an MSI board built for Fujitsu-siemens for the Jetson@home series computer:
MS6353 VER20B MS:5992 VER1(next to modem) and N1996
Don't know if any of these will help but hey what do I have to lose?

The thing is it reads my xp1700 @1150Mhz and will lock up trying to play dvd's, sounds like bios to me, but I have been wrong before.
TIA
MIKE

[Denniss]

You should set your FSB to 133MHZ in Bios or per Jumper to get it's full speed

Please post the full Bios-ID and the Bios OEM Signon - use Bios Agent from our mainpage in the upper left

You update has to come from Fujitsu-Siemens if it's one of their OEM-products - if MSI has a Retail-Bios for the same board it may work or may not

I did get the numbers but the bios won't let me adjust the settings and I only have 2 jumpers to choose from but I don't know what they are for so I shall try them while you read this post.
Here are the numbers:
Top of screen
award bios v6.00pg
Mid page
W6353F1 V3.0 121901 18:04:08
Bottom of page
nVidia Nforce 6A61AM4BC-00 12-19-01

[Denniss]

It seems there's no newer Bios from FJS - i have only found a manual in German language
http://www.fsc-pc.de/support/drvupload. ... o=Download

Might be available in english too
http://www.fsc-pc.de/support/SoftwareAssist.asp
www.fujitsu-siemens.com

Thanks I got lucky on the first jumper I switched and got my board to reckognize my athlon xp1800 ....finally. As far as the bios I guess I get what I got ?
Well I have ordered a mATX chaintech (NIF2 Summit) nforce board to replace this one, so I geuss this one now becomes the little dvd player that couldn't. It'll make a good gamer for the nephews games anyway.
AGAIN THANKS FOR THE HELP

[edwin]

manual not available in english...