Skip to content

Board index ‹ Do you need a BIOS update? ‹ Video (VGA) and other BIOS/Firmware ‹ Video resolution problems

Video resolution problems

Video, SCSI, modem, CDROM/CDR/CDRW, etc.
Post a reply

Post Wed Apr 20, 2005 1:48 pm
KachiWachi User avatar
The New Guy
Recommended by Wim's BIOS... BIOS Agent scan: Upgrade your BIOS! Driver Agent scan: Instant Access to 116,215 Device Drivers Updates!

Post Wed Apr 20, 2005 1:48 pm
KachiWachi User avatar
The New Guy

Posts: 1439
Location: Pennsylvania, USA
Go to http://www.eizo.com/downloads/ICC/index.asp and download the F35inf.exe file. This should install the proper information to Win98SE, though with DDC, Windows should have grabbed the information from the monitor already.


Post Wed Apr 20, 2005 6:52 pm
Specter New visitors - please read the rules.

Posts: 13
Thanks very much Kachi Wachi. :D
I done it and now Eizo F35 is recognized! :D

But nothing happens... :(

I mean that image quality remains low (for example a black straight line appears composed of a sequence of points 8O ) and if I set the screen resolution at 1024x768 (as supported by the monitor ) now the image enlights the full screen but appears "small"...

Desperate... :cry:

Post Thu Apr 21, 2005 2:52 pm
KachiWachi User avatar
The New Guy

Posts: 1439
Location: Pennsylvania, USA
Is the Display Adapter Refresh Rate set for "Optimal" in the Device Manager?

Post Thu Apr 21, 2005 6:20 pm
Specter New visitors - please read the rules.

Posts: 13
It is set to 85 hz that is the monitor refresh frequency.

Post Fri Apr 22, 2005 2:09 pm
KachiWachi User avatar
The New Guy

Posts: 1439
Location: Pennsylvania, USA
You can try "Optimal" and see what happens.

Other than that, perhaps there are controls on the monitor itself to "adjust" things...see if any of those helps.

Other than that, not much else to try...except maybe that you got a "bad" monitor". :(

Post Sun Apr 24, 2005 11:26 am
Specter New visitors - please read the rules.

Posts: 13
Hi guys,

Finally I solved ! :D :D :D

I just forgotten to update the screen resolution after the driver installation.
Now it runs very fine! :D

Thanks to You Kachi Wachi: your suggestions has been crucial. :wink:

Thanks also to everyone adviced/suggested me in this thread. :wink:

Very grateful guys.

Much good luck!

Post Sun Apr 24, 2005 2:00 pm
KachiWachi User avatar
The New Guy

Posts: 1439
Location: Pennsylvania, USA
NP...glad you got it working! :D

Recommended by Wim's BIOS... BIOS Agent scan: Upgrade your BIOS! Driver Agent scan: Instant Access to 116,215 Device Drivers Updates!
Previous
Post a reply

Return to Video (VGA) and other BIOS/Firmware

 


  • Related topics
    Replies
    Views
    Last post
Theme: Absolution design (Christian Bullock) / Forum: PHPBB