Recommended by Wim's BIOS... BIOS Agent scan: Upgrade your BIOS! Driver Agent scan: Instant Access to 116,215 Device Drivers Updates!

no video

Video, SCSI, modem, CDROM/CDR/CDRW, etc.

Moderator: Moderators

Post a reply

no video

 
Top

no video

Postby lee64 » Tue Nov 27, 2007 12:43 am

Hi I have a (Dell FLEXATXSTC 733C) with a and a (MS-6312 VER) Motherboard. I am not getting any Video, I have tried has much troubleshooting has possible; the only option is to use my Advanced PC Diagnostic Card. The display on the card reads (EO) on the manual, it means (Initialize the Chipset) which tells me I have a (Boot Block in Flash ROM). Do I need to Flash ROM? Can anyone please help me?
lee64
lee64
New visitors - please read the rules.
 
Posts: 3
Joined: Fri Nov 23, 2007 8:02 pm
Top

Postby edwin » Thu Nov 29, 2007 1:21 pm

check first if you have bad capacitors.

http://www.badcaps.net
edwin/evasive

Do not assume anything

System error, strike any user to continue...
User avatar
edwin
The Hardware Archivist
 
Posts: 4645
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Top

response from lee64

Postby lee64 » Sat Dec 01, 2007 3:50 am

thanks for the info edwin, the cause of the problem is bad capacitors.

lee64
lee64
New visitors - please read the rules.
 
Posts: 3
Joined: Fri Nov 23, 2007 8:02 pm
Top
Post a reply

Return to Video (VGA) and other BIOS/Firmware

Who is online

Users browsing this forum: No registered users and 0 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO
Protected by Anti-Spam ACP