|
Recommended by Wim's BIOS...
|
| View previous topic :: View next topic |
| Author |
Message |
edwin The Hardware Archivist

Joined: 20 Mar 2002 Posts: 4331 Location: Netherlands
|
Posted: Tue Aug 19, 2008 5:48 pm
Post subject: |
|
|
http://www.badflash.com
As for a PCI card, I very much doubt that is going to work, there's no bios to enumerate any devices on the PCI bus. On ISA that is not needed, it's all hardware.
_________________ edwin/evasive
Do not assume anything
System error, strike any user to continue... |
|
| Back to top |
|
 |
|
|
cdavidson New visitors - please read the rules.
Joined: 28 Jul 2008 Posts: 10
|
Posted: Wed Aug 20, 2008 2:16 pm
Post subject: Unbelievable... I revived my PC, and here's how I did it... |
|
|
For the benefit of anyone who suffers the same outcomes I have, below are the step I undertook to revive my computer from a 'dead like' state.
On the advice of a local computer store tech, I...
1) completely disconnected all the drives (floppy, cd-rom, hard drive) from the motherboard (i.e. pulled out the power cords and cables connecting them to the motherboard)
2) removed all other peripherals from the motherboard (i.e. took out all PCI, AGP, etc. cards)
3) left only the keyboard and monitor connected, then rebooted the PC.
Compare to the previous boots where only the light on the CD-ROM flashed once, I was now getting a few different beeps (one of which continued non-stop). Video wasn't working, but at least I had more life in the computer than before.
4) Next I turned off the PC, reconnected the floppy drive, put in my bootable floppy disk, and turned the PC back on.
The beeping noises disappeared, and I could here the PC booting, but still no video to see what was going on.
5) Next I powered off the PC, placed an AGP video card in the AGP slot, and turned the PC back on.
As luck would have it, video came through and I was able to see the PC was booting nicely to a DOS prompt off the floppy. I immediately ran the flash utility and reinstalled my old bios.
6) Next I powered off the PC, replaced all my peripherals and reconnected all my drives.
When I turned the PC back on, the computer instantly returned to working order, and if nothing ever happened. I’m still without the 1440x900 resolution option I was originally after, but at least my PC is working again.
If anyone believes they no why the patched bios didn’t work for my motherboard, I may be willing to try another bios upgrade in the future.
Thanks to everyone who responded on the thread.
|
|
| Back to top |
|
 |
edwin The Hardware Archivist

Joined: 20 Mar 2002 Posts: 4331 Location: Netherlands
|
Posted: Thu Aug 21, 2008 9:40 am
Post subject: |
|
|
Sounds like the new video bios got corrupted somehow. Since you have a backup of your old bios, can you please send that in?
_________________ edwin/evasive
Do not assume anything
System error, strike any user to continue... |
|
| Back to top |
|
 |
cp BIOS Guru

Joined: 21 Oct 2002 Posts: 1451 Location: Germany
|
Posted: Sat Aug 23, 2008 7:32 am
Post subject: |
|
|
i repatched the bios from the AOpen site. i'd be great if you could try it - if you're still interested. i'll upload it asap.
please keep your bios and the emergency flash disk. just in case something goes wrong again. and if so there's still the option to patch your backup bios like edwin suggested.
_________________ If you email me include [WIMSBIOS] in the subject. |
|
| Back to top |
|
 |
cp BIOS Guru

Joined: 21 Oct 2002 Posts: 1451 Location: Germany
|
Posted: Sun Aug 24, 2008 8:21 am
Post subject: |
|
|
i just uploaded the new patched version. feel free to test it. it's available on the download page.
_________________ If you email me include [WIMSBIOS] in the subject. |
|
| Back to top |
|
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|