Forum FAQForum FAQ SearchSearch MemberlistMemberlist   UsergroupsUsergroups RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Wim's BIOS RSS FeedRSS Log inLog in

Bad flashing for a M598LMR bios

 
Post new topic   Reply to topic    Wim's BIOS Forum Index -> My motherboard is dead

Recommended by Wim's BIOS...

BIOS Agent scan: Upgrade your BIOS! Driver Agent scan: Instant Access to 116,215 Device Drivers Updates!

View previous topic :: View next topic  
Author Message
votan12
New visitors - please read the rules.


Joined: 30 Jun 2002
Posts: 3

PostPosted: Sun Jun 30, 2002 10:33 pm     Post subject: Bad flashing for a M598LMR bios Reply with quote

Hi, I really need help with this...
I tryed to upgrade the bios with the 2K1222.rom file from the PCCHIPS site. it did like normally, then restart and it didn't work more.
when the computer starts doesn't display nothing and try to read the floppy. I put a disk with a rom image called AMIBOOT.ROM but it didn't work. Then I was trying to HOT-FLASH with the UNIFLASH utility, with and without writing BOOTBLOCK but ever gives the same error. "FLASH DATA VERIFICATION ERROR. RETRY [Y/N]". The AMIFLASH can't detect the CHIP
I can't get the original image for this chip.

MOBO: PCCHIPS M598LMR-H
mp: AMD K6-III 400

UNIFLASH displays:
Flash Rom Chip: Macronix MX29F002(N)T/5V
PCI chipset: Intel Triton II 430VX

The mobo where I'm HOT-FLASHING: 10/18/96-i430VX-10031996C-00 with AWARD BIOS 4.51PG 10/20/1996S 586.

THANKS.... I really appreciate your help.
Back to top
View user's profile Send private message Send e-mail
votan12
New visitors - please read the rules.


Joined: 30 Jun 2002
Posts: 3

PostPosted: Sun Jun 30, 2002 10:56 pm     Post subject: Reply with quote

I forgot to mention that the BIOS CHIP has a "V6.0" label. So I suppossed that I need an image file for the M598LMR V6.0, I think so.
Back to top
View user's profile Send private message Send e-mail
Rainbow
The UniFlasher


Joined: 20 Mar 2002
Posts: 3122
Location: Slovakia

PostPosted: Mon Jul 01, 2002 7:36 am     Post subject: Reply with quote

Did you get verify error in half of the chip (half of the green bar are XXXs)? This means that the board you're flashing on does not support 256KB chips (128KB only). Try another board.

BTW.: The AMIBOOT.ROM method - does it start to read the file? If no, reformat the floppy (so it's blank), put AMIBOOT.ROM there and try again. If it reads the file, make sure that you wait long enough - it can take several minutes.
_________________
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere http://www.uniflash.org
Back to top
View user's profile Send private message Send e-mail Visit poster's website
votan12
New visitors - please read the rules.


Joined: 30 Jun 2002
Posts: 3

PostPosted: Tue Jul 02, 2002 2:37 pm     Post subject: Reply with quote

Yes, it marks something like this:
"XXXXXXXXXXXXXXXX[][][][][][][][]]][][]XX[][]X"
and then gaves me the error message.

The uniflash show me the info of the original BIOS CHIP of the mobo where I'm trying to hot-flash my bios before I change them, and it shows that it's a Macronix MX29F022(N)T/5V, Intel Tritron II 430VX, one line down it says it's a 256K BIOS.

With the floppy topic, it seems like is reading, for a moment, the light is on all the time, but it didn't sound like reading. I tried with a couple of new disks, and each time I copied a new .rom file, reformat the disk.
Always calling as AMIBOOT.ROM, and some time I wait about 15 minutes and nothing happens.

I was thinking to buy a new chip, because I tried a lot of times and nothing, but I don't want to give it up.
In case I decide to buy a chip in badflash.com which image (.rom) will be the properly for me? there are a lot of files...

THANKS for your reply, I will try in other Motherboard.
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Wim's BIOS Forum Index -> My motherboard is dead All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group