P4 Mobile on desktop

Maninabox · Posted: Wed Apr 05, 2006 4:12 pm Post subject: P4 Mobile on desktop

Hi.

I don't know if it's the right section to post but i don't know where ask.

I have p4 mobile 1700 on desktop motherboard. It's correct recognized but it run with lower multiplier (12x). It' s possible to set the higher multiplier (17x)?
Cpu-z and others software recognized cpu and show all two multiplier.

Thanks an advance.

Bye

ajzchips · Posted: Thu Apr 06, 2006 12:26 am Post subject:

Would be a good idea to tell us what motherboard you have and if you do have a BIOS entry that deals with the multipliers...
_________________
<betaBIOS> <okBIOS> <Utils> <MyJob>

Denniss · Posted: Thu Apr 06, 2006 4:45 am Post subject:

If multiplier control is not available simply raise the FSB (if possible)
_________________
32GB/64GB-BUG patched and tested BIOS
Uniflash - flash anything everywhere

Maninabox · Posted: Thu Apr 06, 2006 11:08 am Post subject:

Now the board is a cheap ecs p4vxasd2+ but i have a p4pe ready to start when arrive new ddr ram modules.

Yes, i know that the only choice on intel is to change fsb. The processor run on ecs 12x140 (1680mhz) with only 1,184 vcore (so little undervolting), show in bios, in cpuz and others similar utilities. On asus it could run at 166. I seek one more way to get more speed. The temperature is about 25/26° with slk800-u.

There is any asus p4pe mod bios?

Bye