Search found 6 matches
- Thu Feb 06, 2003 6:45 pm
- Forum: RAM compatibility with BIOS
- Topic: Old Gateway P5-120
- Replies: 7
- Views: 5457
SOLUTION!
First, I want to thank the people that replied to my query. They started my search for the answer in the right direction. Anyway, the solution: The board on the P5-120 only accepts RAM with 2K refresh rates. The RAM I had origionally bought had a 4K refresh rate and, not suprisingly, did not work. O...
- Wed Jan 22, 2003 12:05 am
- Forum: RAM compatibility with BIOS
- Topic: Old Gateway P5-120
- Replies: 7
- Views: 5457
Re: Old Gateway P5-120
Hi Nick,
There are 4 chips on each SIMM, all on one side.
Amptron
There are 4 chips on each SIMM, all on one side.
Amptron
- Thu Jan 16, 2003 6:23 pm
- Forum: Other BIOS update issues.
- Topic: Is 1.00.06.CN0 BIOS proper updgrade for 1.00.03.CN0T?
- Replies: 4
- Views: 4688
No recovery jumper on this board
First, thanks for your reply... Second, from my reading of the MB manual, there doesn't appear to be a recovery jumper on the board. If you screw up flasing the BIOS, there is no recovery code in the FLASH device, so you have to get a special PCI card from the manufacturer (Gateway? Intel?) that all...
- Wed Jan 15, 2003 10:24 pm
- Forum: Other BIOS update issues.
- Topic: Is 1.00.06.CN0 BIOS proper updgrade for 1.00.03.CN0T?
- Replies: 4
- Views: 4688
Is 1.00.06.CN0 BIOS proper updgrade for 1.00.03.CN0T?
I have an old Gateway P-120 with a Pentium 120 MHz CPU, a Selectron motherboard (MBDSAC045AAWW - a version of the Intel Advanced/ATX), and an Intel Triton 430 FX chip set running under the AMI 1.00.03.CN0T Bios. Does any one know if the 1.00.06.CN0 BIOS, which I can download from the Intel site, is ...
- Wed Jan 15, 2003 10:18 pm
- Forum: RAM compatibility with BIOS
- Topic: Old Gateway P5-120
- Replies: 7
- Views: 5457
Old Gateway P5-120
I have an old P5-120 with a Pentium 120 MHz CPU, a Selectron motherboard (MBDSAC045AAWW), and an Intel Triton 430 FX chip set running under the AMI 1.00.03.CN0T Bios. I am trying to upgrade the memory on this machine from 64 Meg to 128 Meg. But when I install the new memory, 4x32 Meg 60ns EDO SIMMs ...