BIOS Updates forum

cpu and memory already checked and are OK.

i often visit the forum and from what i have understand so far (i am not a hardware expert) it is possible using uniflash and the hot flash method to flash another motherboards bios even with a differnt chipset ,even with a diffrent bios memory capacity. well the bios thats needed to be flashed is f...

PIN1 = Data ,
PIN2 = Clock
PIN3 = GROUND
PIN4 = NC,
PIN5 = Vcc

the motherboard is an epox ep-68lxr (lx chipset)

"I realize this thread is a bit old,"

[

the reply is fast enough (In greece we say -better late(r) than never-).

is there a possibility to find
with a polymeter to find the pinout ????

thanks for the quick reply ,already made the question in the right place of the forum
http://www.wimsbios.net/phpBB2/viewtopic.php?t=2525
a clarification ----its about the ps/2 mouse header on the board 5 pins .

(the 5pins header is onthe motherboardboard) i nthe net i ve found some info for pcpartners mobos pin#1 +5V pin#2 No connection pin#3 Mouse Data pin#4 Ground pin#5 Mouse clock bu i want to doubleecheck/verify/confirm before i make the cable . Anyone confirming ??? thanks in andvance.

thanks alot
im encountering a serial problem getting the serial port working
even from dos(thats the reason why i needed the manual ).

now the 5pin of an epox lxr header is my only prob (the pdf says nothing but thats for another place of the forum.
thans again.

the manuals here are for sis 559x and later sis chipset
the motherboard is an ASUS PCI/I-p55sp4 (SiS 5511/12/13 )
and probably because it si a little older doesnt appear in this ftp directory where i had already searched .
thank anyway
anyhelp wil be appreciated.

looking for asus p55 (sis5511/12/13chipset) manual.
thans in advance
( the manuals i have found so far are
for asus p55 variants with intel chipsets)