Search found 9 matches
- Mon Nov 17, 2003 4:04 pm
- Forum: My CPU isn't recognized
- Topic: DFI CW-35-S MOBO 600 Celeron upgrade to 700Celeron Problem
- Replies: 10
- Views: 7683
Another snag
Ok Made the ms-dos boot disk on Windows XP. Copy files AWDFLASH and CW350305 to the same disk. Check contents of A:\ everything set. Reboot to A:\ Type DIR Get the list. Type AWDFLASH CW350305. Starts up award flash. Asks if I wanna save current BIOS. Typed y it says starts copying to A:\ Then stops...
- Sat Nov 15, 2003 8:26 pm
- Forum: My CPU isn't recognized
- Topic: DFI CW-35-S MOBO 600 Celeron upgrade to 700Celeron Problem
- Replies: 10
- Views: 7683
Bios update
Downloaded The CW350305 zip file From DFI. Extract, Format A:\ Then Copy files to A:\ (The flash utility and the .bin file) Re-boot to A:\ Freezes at DMI screen w/ message: Remove disks or other media Press any key to restart My Question is : Is this where your supposed to go into the motherboard an...
- Mon Nov 10, 2003 12:29 am
- Forum: My CPU isn't recognized
- Topic: DFI CW-35-S MOBO 600 Celeron upgrade to 700Celeron Problem
- Replies: 10
- Views: 7683
- Sun Nov 09, 2003 10:49 pm
- Forum: My CPU isn't recognized
- Topic: DFI CW-35-S MOBO 600 Celeron upgrade to 700Celeron Problem
- Replies: 10
- Views: 7683
DFI CW-35-S MOBO 600 Celeron upgrade to 700Celeron Problem
Appreciate any help Motherboard is a DFI CW-35-S Revision C2 600Celeron processor I obtained a 700mghz Celeron. Checked intel. Processor Specs are identical save The 6-700 Both are pc 66mghz. Checked DFI, Mobo supports up to 700mghz processor. Should just change out.? Right? Wrong! Switched them Try...
- Sun Sep 07, 2003 3:08 pm
- Forum: My motherboard is dead
- Topic: changed clock speed in bios,
- Replies: 5
- Views: 3379
Got it!!!!
that did it !!!! thanks.
- Sat Aug 23, 2003 2:07 pm
- Forum: My motherboard is dead
- Topic: changed clock speed in bios,
- Replies: 5
- Views: 3379
Clearing cmos
Swiched the jumper to clear, then back. With the battery in, and out.(left batt out 24hrs one time.) Nothing . the motherboard is a m758lmr. What is the correct procedure for clearing cmos?
- Thu Aug 21, 2003 3:04 pm
- Forum: My motherboard is dead
- Topic: changed clock speed in bios,
- Replies: 5
- Views: 3379
how do you clear cmos?
is is the same on most mother boards?clearing cmos that is?how you do it?
- Wed Aug 20, 2003 11:05 pm
- Forum: My motherboard is dead
- Topic: changed clock speed in bios,
- Replies: 5
- Views: 3379
changed clock speed in bios,
I changed speed from 66 to 700 in the bios, Very dumb!!!!!!
now system wont boot how do i undo this?
now system wont boot how do i undo this?