Search found 9 matches

by Azgarde
Mon Apr 09, 2007 4:46 pm
Forum: What is my motherboard?
Topic: Help me please:UA69KS00C-00
Replies: 4
Views: 3957

Thank you Edwin.
by Azgarde
Mon Apr 09, 2007 4:31 pm
Forum: My hard drive isn't recognized
Topic: Conformation: 06/09/1999-i440BX-NS351-UA69KS00C
Replies: 10
Views: 8210

PC , Canada calling once more. About a 4-5 hour time difference. (Quebec) Thank you once again for your reply. does it still hang on autodetection in the bios? Yes. I have these settings. Automatic, normal, large, LBA. I turned off halt on errors, to halt on none. Just to be sure it wasnt blocking ...
by Azgarde
Sun Apr 08, 2007 6:48 pm
Forum: My hard drive isn't recognized
Topic: Conformation: 06/09/1999-i440BX-NS351-UA69KS00C
Replies: 10
Views: 8210

PC Thank you for your suggestions, I had downoloaded this same document earlier. I did not try the alternate settings as they are for all the other types of Windows except XP But then I said what the hey give it a shot. This time it recognized the drive, but in every case using all of the settings,...
by Azgarde
Sun Apr 08, 2007 3:41 pm
Forum: What is my motherboard?
Topic: Help me please:UA69KS00C-00
Replies: 4
Views: 3957

Thank you CP. Your help is very much appreciated.

Problem resolved, end of thread.
by Azgarde
Sun Apr 08, 2007 12:49 am
Forum: What is my motherboard?
Topic: Help me please:UA69KS00C-00
Replies: 4
Views: 3957

Help me please:UA69KS00C-00

Here it is people, Im sorry if I am inadvertantly cross posting. But I do need to know the name of my Motherboards manufacturer. Ive read the FAQ. Ive searched for my BIOS. Inconclusive. Ive read this thread...... and read, and read, and read............... Edwin didnt answer in my other post so I g...
by Azgarde
Sat Apr 07, 2007 9:50 pm
Forum: My hard drive isn't recognized
Topic: Conformation: 06/09/1999-i440BX-NS351-UA69KS00C
Replies: 10
Views: 8210

CP Thank you for your response. "Quote" 1. use the clip jumper on your 80GB hdd to clip if to 32GB (just for the bios) This drive offers me the following settings: 1. Single or master. 2. Master with slave present. 3. Slave. 4. Cable select. With any of the above settings the computer hangs on the d...
by Azgarde
Sat Apr 07, 2007 3:05 pm
Forum: My hard drive isn't recognized
Topic: Conformation: 06/09/1999-i440BX-NS351-UA69KS00C
Replies: 10
Views: 8210

Edwin thank you for the prompt reply. In my preceding post I should have said Patched bios by Edwin and downloaded from ajzchips. I will wait untill you are finished looking into this. I will not assume that my instructions are correct. This is my first flash job and i wouldnt want to fail. Thanks a...
by Azgarde
Fri Apr 06, 2007 6:35 pm
Forum: My hard drive isn't recognized
Topic: Conformation: 06/09/1999-i440BX-NS351-UA69KS00C
Replies: 10
Views: 8210

Conformation: 06/09/1999-i440BX-NS351-UA69KS00C

I would be grateful if you would please take the time to verify that my information, found on your site is accurate and in the correct order . I wish to install a WD800JB Caviar SE. 80Gb. Program: eSupport.com BIOS Agent Version 3.62 BIOS Date: 06/09/99 BIOS Type: Award Modular BIOS v4.51PG BIOS ID:...