BIOS Updates forum

yes its like that

within windows, anything is ok, CPU will shown as PIII-S

I only thought about the availability of one microcode modified bios like for the P3B-F, CUSL2 black Pearl etc. but you are right, its only one "cosmetic thing"

thanks a lot for feedback

greetings

http://www.gigabyte.com.tw/Support/Motherboard/BIOS_Model.aspx?ProductID=1449 good morning @all I have that above mentioned mainboard running fine with Lin Lin S370 converter and Tualatin PIII-S 1400 http://processorfinder.intel.com/details.aspx?sSpec=SL6by the only aesthetically point is that Tuala...

http://www.giga-byte.de/Products/Motherboard/Products_Spec.aspx?ProductID=1517 that board is running very well with my Coppermine, as well with SD-RAM 168 or 184 (DDR) so I have as well a choice of tualatin cpu gigabytes site offers me CPU support Tualatin N/A - in my opinion means not applicable or...

@CP

great !!!

many thanks

Board is provided by

ITE IT8702F-A

LAN, Grafics, Sound all onBoard

Morning @all one mATX MB, is running well, but couldn´t identify up to now :-( may be anyone has infos Bios String 09/24/2001-815E/EP/EB-6A69RPRIC-00 Chipset Intel Solano i815e @boot it is possible to enable small logo which shows LINTEC something similar to Hewlett Packard screens @bootup here one ...

morning @all I added to config.sys of first floppy of Drive Magic the following files DEVICE=HIMEM.SYS REM DEVICE=EMM386.EXE DOS=HIGH,UMB DEVICE=UDMA2.SYS DEVICE=UDMA2S.SYS DEVICE=UDMA.SYS DEVICE=UDMAJR.SYS LASTDRIVE=Z REM ------------------------------------------------------- REM -- Codeseitencode...

@denniss so both SY-7VBA133U I have - still have the same performance unless different peripherials if I do the same with Asus P2B or P3B-F the performance in DOS mode is much better, as well with Siemens D1184 /Intel 815 running with Celeron 1400 Tualatin and 512 PC133 but, both, P2B and P3B-F havi...

hy Denniss quick response ! tricky will be, to compile any third party driver into Drive Magic 3.5" floppy software main reason for my post is acceptable time to craete images of HDDs especially if partition is sized and covered more than usual as well I will not give up my Tualatin despite that top...

good morning @all as I have written at headline the problem is a low transfer rate about 70 MB /min in DOS mode with Drive Magic 6.0 with snapshot image software the transferrate is about 750 MB / min, running in WIN XP it doesn´t matter starting Drive Magic with two Floppys or with temp coming from...