BIOS Updates forum

Ok, I just downloaded the bios you wrote of. Unfortunately, there was no documentation with it specifying which PCB versions it supports. The fic support site is down for the time being. I wonder: if I were to flash the bios with an award bios, when it previously used an ami bios, would the procedur...

OK, it's PCB version 1.3 for sure (there's a little 1.3 printed on the board.) So, I'm using the latest bios specifically for my PCB already. The other power management options seem to work, just not the restore after power/AC loss. Any ideas? Rainbow, If you have time, could you check out my post i...

I am using the bios from the FIC site which was labeled as the latest one. PCB: 1.3 BIOS: AMI BIOS file name: qc6172.rom BIOS version: QC617 Release date: 2000/3/10 Flash Utility: flash641.com I've heard that for PCB 1.4 there is an ami AND an award bios available, but I don't know where to get thos...

This may very well be a power supply / case issue, but I couldn't resist taking it up here, because people seem so knowledgable here. I have a FIC VB-601-V motherboard running amibios QC6712 PCB 1.3. I am trying to get the computer set up so that it turns back on automatically after an outage. I hav...

I am using amibcp to do this, and I have run into problems. Here is a copy of my email to highpoint tech support. Hello, I have been trying to combine the highpoint-tech biosv12.rom file for their HPT371 UDMA/ATA133 Controller with the QC6172.rom bios file for my FIC VB-601-V motherboard, which was ...

I have a Maxtor 80 GB drive. The bios hangs unless I use the alternate capacity jumper which limits it to 32 GB. If I limit it to 32 GB, I can access those first 32 GB fine. MB string is : 61-0729-001121-00111111-071595-VT691-1VIA6920-H I flashed the bios with the QC6172 update PCB 1.3, release date...