ADDING BIOS LOGO Problem

Discusses BIOS flashers and utilities from Award, AMI and Uniflash
Post Reply
roy.reglan
I didn't read the rules
Posts: 5
Joined: Thu Aug 15, 2002 4:27 am

8O Any can help me add a bios logo to my Tomato BX98 Motherboard i try using cbrom6 and it give me this error:

When i Try to run with this string.
CBROM6.EXE BX98.BIN /logo Logos.bmp
and gives me this message.
CBROM V6.03B (c) Award Software 1999. All Rights Reserved.
ADDING LOGOS.BMP 50.4%
BX98.BIN have not enough space for adding ROM. (Over 01C3h bytes)

When i Try to run with this string.
CBROM6.EXE BX98.BIN /logo
and gives me this message.
CBROM V6.03B (c) Award Software 1999. All Rights Reserved.
Not found i:\eprom\D4LOGO.BMP !!!

The logo size is 160 x 140 in 256 Colors.
Can anybody help with this problem of mine.
NickS
BIOS Bodhisattva
Posts: 3145
Joined: Fri May 03, 2002 10:34 am
Location: Thames Valley, UK

Can you post a link to the instructions you followed ?
Tested patched BIOSes. Untested patched BIOSes.
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
NickS
BIOS Bodhisattva
Posts: 3145
Joined: Fri May 03, 2002 10:34 am
Location: Thames Valley, UK

Did you release the existing epa logo file from the .BIN ?
Tested patched BIOSes. Untested patched BIOSes.
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
tomuf
BIOS Newbie
Posts: 18
Joined: Fri Aug 16, 2002 3:35 pm
Contact:

you don't have enough free space in ROM - you must free some space; maybe freeing old logo will help you cbrom6 bios.bin /logo release; if it doesn't, you can try to release something else, but don't release anything you aren't 100% sure what does; for example, my A7V333 MB has optional RAID controller and BIOS is present even for A7V333 boards that don't have it - it takes about 30kb of ROM so it is good idea to release it when it isn't needed...
Post Reply