I have this mobo BE6 from Abit, the bios is from 08/24/1999 - version MU, and I want to flash with latest version.
But every time I flash I get this line in awd-program: 'the program file's part number does not match with your system'....and the bios isn't updated.
What do I do wrong? and - what have I to do right? Is it better to use Uniflash? (I hardly daring use it, because I made (!!) a bad flash on a MSI-mobo with the right bios-version.)
Kindly regards
Torsten........
Awdflash tells: "...part number does not match..."
Latest version is TH.
For BE6 use awdflash823.exe:
http://file.abit.com.tw/pub/download/fa ... ash823.exe
You can use these parameters:
awdflash823 be6_th.bin /py /sy /r
/py = Program flash memory
/sy = backup original BIOS to disk file
/r = Reset system automatically afte flashing
For BE6 use awdflash823.exe:
http://file.abit.com.tw/pub/download/fa ... ash823.exe
You can use these parameters:
awdflash823 be6_th.bin /py /sy /r
/py = Program flash memory
/sy = backup original BIOS to disk file
/r = Reset system automatically afte flashing
More than 100,000 BIOS strings in my database just now!
http:/ /www.kuriaki.has.it/
http:/ /www.supportbios.info
------------------------------------------
Saludos desde Cancun, Mexico
KURIAKI
http:/ /www.kuriaki.has.it/
http:/ /www.supportbios.info
------------------------------------------
Saludos desde Cancun, Mexico
KURIAKI
Thnx...When I tried a(s described in my first topic) I used 823-version + TH-version. Only 1 thing was different compared to your suggest: I didn't have the bin-version of the 'TH'-bios, I had the Abit-version, who is an 'exe-'file..
(So how am I going to dl from your supportbios-site? no action takes place when cursor is placed on icon..)
(Another thing: when I write 'awdflash823' in dos-mode the program starts, and it dont seems that the parameters take action.
The awd-exefile is showed in dos as 'awdfla~1'.)
(..sigh..yeah - there is a lot of things that i dknow too little about...)..
(So how am I going to dl from your supportbios-site? no action takes place when cursor is placed on icon..)
(Another thing: when I write 'awdflash823' in dos-mode the program starts, and it dont seems that the parameters take action.
The awd-exefile is showed in dos as 'awdfla~1'.)
(..sigh..yeah - there is a lot of things that i dknow too little about...)..
You need to decompress be6th.exe first in your hard disk.
Copy BE6_TH.BIN then to your floppy.
Copy BE6_TH.BIN then to your floppy.
More than 100,000 BIOS strings in my database just now!
http:/ /www.kuriaki.has.it/
http:/ /www.supportbios.info
------------------------------------------
Saludos desde Cancun, Mexico
KURIAKI
http:/ /www.kuriaki.has.it/
http:/ /www.supportbios.info
------------------------------------------
Saludos desde Cancun, Mexico
KURIAKI
Yes - you were rigth! the exefile is a 'compressed' file....
And that could be the reason, that my former flashing a MSI-board went wrong: i didnt know that the 'exe'file was compressed files.
Explanation: my winxp shows the file as a program-file, not a compressed one...damn - i have to learn....
So one more time: thnx for your help, it was really useful!
And that could be the reason, that my former flashing a MSI-board went wrong: i didnt know that the 'exe'file was compressed files.
Explanation: my winxp shows the file as a program-file, not a compressed one...damn - i have to learn....
So one more time: thnx for your help, it was really useful!