MB Asus A7V266-E and Abit NV7-133R use SST49LF020. I have only SST49LF002A - on features much like it. But when SST49LF002A (with correct flashing) installing in the said belongings - get 00 on POST-card. But in an effort flash SST49LF020 on any other MB - get "unknown flash type". Why? That for the PRINCIPLE difference?
And else. Uniflash correct defines this type in Asus A7V266-E, but can not correct to flash. Aflahsh/Pflash do not know such tips, other flashers under DOS did not find - can prompt?
SST49LF020/49LF002A - in than difference?
49LF020 has LPC interface while 49LF002(A) has FWH (Firmware Hub) interface. They're not compatible.
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
UniFlash - Flash anything anywhere
-
apple_rom
- Use my patch at your own risk!!
- Posts: 125
- Joined: Tue Jan 07, 2003 11:39 am
- Location: Minsk
- Contact:
I seemed that this one and same. Thank you, shall to know. 
Then has stayed the second part of the question. Uniflash incorrect flashing SST49LF020 (in process appear uncorrect-flashing blocks) on MB Asus A7V266-E, while standard flasher from Asus this does correct (this flash). This because of Asus particularities?
Then has stayed the second part of the question. Uniflash incorrect flashing SST49LF020 (in process appear uncorrect-flashing blocks) on MB Asus A7V266-E, while standard flasher from Asus this does correct (this flash). This because of Asus particularities?
Last edited by apple_rom on Sun Nov 02, 2003 3:44 pm, edited 1 time in total.
