BIOS Updates forum

Yes, I have the cable connected correctly. I set my Intel WS440BX mobo up in another case with a couple hard drives and a cd drive. I took the cdrw out of the biostar system and hooked it up with my Intel system, It works fine. I also took the cd drive out of the Intel system and but it where the cd...

I guess I need to change this post to "bios won't recognize my cdrw" I've tried it as the master and slave both on secondary ide, even tried it by itself on the secondary ide as master, still says "none" during the boot process. The light on the front of the cdrw stays on all the time. Here's a list...

"wouldn't"=During post/boot message on screen would read: primary master: maxtor 20gb primary slave:liteon dvd secondary master: none secondary slave:none Ok, since then I put the biostar mobo back in and switched the ide devices around. I was reading some more forums here and there and came to the ...

The drive is set a as master on the secondary IDE. My drives are laid out as follows: Primary master: 20GB maxtor Primary Slave: Liteon DVD Secondary Master: 40GB WD Secondary Slave: Liteon 16x10x40 I'm running an Intel WS440bx board right now. I swapped out mobos and the biostar wouldn't find the 4...

I can't get my board to recognize my 40gig WD harddrive. I have the latest bios but it still won't recognize the drive. I think I need a patch. I read this post and the bios worked for this guy. I didn't use any switches when I flashed however. http://www.wimsbios.net/phpBB2/viewtopic.php?t=93&highl...