Cann't use WinXP after changing CPU.

Don't ask how to over-clock.
Post Reply
goejdsla
New visitors - please read the rules.
Posts: 1
Joined: Fri Mar 17, 2006 10:01 am

He~~~~l~~~~~p~~~~~~
I have ThinkPad 600x-2645-3ek non speedstep model. (512MB RAM)
I exchanged PIII 450Mhz CPU to PIII 650Mhz.
WinXP was installed without battery (Only AC Power) after changing CPU.
Because there was stop during installation WinXP with battery, I removed battery.
I don't know why.
Another problem is also stop after installation WinXP.
My 600x stopped during booting.
When I pushed Fn+F2, booting went well.
Is there any solution to prevent stop during booting?
Cann't I use WinXP in my 600x?
(Do I comeback to the PIII450Mhz CPU if I use WinXP?)
I need your help!!!
Yaye
BIOS Rookie
Posts: 53
Joined: Tue Jan 10, 2006 3:12 am
Location: Near Milan, Italy

I think that the stops aren't depended by use of battery or ac power.

I can only say this thing!
Vpoint7
New visitors - please read the rules.
Posts: 4
Joined: Thu Mar 23, 2006 4:17 pm

Yes, if you change CPU after install Windows, of course they can't read the new CPU Processor, try install fresh Windows XP...
Post Reply