well i have to do further investigations but i think bios is f3 or f4
the board can do the right voltage (and below)
but no video signal...
can anyone tell me if the board/revision can handle a cumine so i know its not the board...
tia
coppermine @ ga-6bxc revision 1.7
-
- New visitors - please read the rules.
- Posts: 15
- Joined: Fri Apr 26, 2002 7:56 pm
greetz, AmenophisIII
-
- BIOS Guru
- Posts: 3153
- Joined: Thu Mar 21, 2002 8:16 pm
- Location: Near Hannover (CEBIT) Germany
- Contact:
Gigabyte says PCB 2.x and above have full coppermine support .
Versions below may or may not support VCore below 1.8V .
If you have a Socket-370 CPU in a CPU-Adapter set the VCore manually to 1.8V .
Versions below may or may not support VCore below 1.8V .
If you have a Socket-370 CPU in a CPU-Adapter set the VCore manually to 1.8V .
-
- New visitors - please read the rules.
- Posts: 15
- Joined: Fri Apr 26, 2002 7:56 pm
:lol: 1.8V are working thx
greetz, AmenophisIII