Duron 1.3GHz in GA-7VTX - No display & nothing...

Don't ask how to over-clock.
Post Reply
gkoon
New visitors - please read the rules.
Posts: 2
Joined: Wed Jan 01, 2003 6:16 am

Hi :D ,

I fix up my new duron 1.3GHz & GA-7VTX, then power up but nothing came out...black screen. :(

Checked http://tw.giga-byte.com/support/viakt26 ... m#link7vtx

I think my mobo need to be flash to be able to support Duron 1.3 GHz but since there is no display at all, how can i flash bios ? :?:

I really need a lower speed CPU to flash bios ? I only have Duron 1.3Ghz with me. Any other alternative ? :?:
Tried change the jumper switch to Duron 1.2Ghz but still nothing.
Should I unlock the CPU so that it could recognise 1.2GHz then update bios so that it recognise 1.3GHz after bios update ? :?:

Pls help. Thanks.
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

You really need older CPU to flash the BIOS.
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
gkoon
New visitors - please read the rules.
Posts: 2
Joined: Wed Jan 01, 2003 6:16 am

Oppss...I sent my pc back to the shop where I bought the mobo...guess what happen... :?: :!:
First, he tried fixing a 1.2GHz Duron on it but still does not work even the mobo does support it...(I don't know why but the last time I test it with a friend 1.2 GHz, it works ??!!.) :?: :(
Then, the technician tried to test it outside the case...Arrr...smoke coming out from the AGP card...the AGP slot and AGP card was burned 8O ...they will send it back for warranty claim...

I'm wondering what when wrong....??!! :?: :!: :cry:
Post Reply