PIII celeron 600mhz isn't regonize after bios flash!

Don't ask how to over-clock.
Post Reply
yhnl4
New visitors - please read the rules.
Posts: 13
Joined: Sat Nov 09, 2002 7:54 am
Location: Australia
Contact:

i've just updated the latest bios a few days ago and realised today the cpu speed isn't the speed it meant to be! motherboard (GA-6BXE) regonize cpu as
450E MHz?? and the vcore voltage isn't the same either, before flash it was 3.3v but now 1.something
FSB is at 100mhz with a multiplier of 6

please help!

thanks in advance
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

What BIOS have you flashed? The latest is:
02/06/2001-i440BX-8671-GA6BXE00C-00
Intel 440BX AGPSet BIOS for 6BXE V.F3a
http://ftp.gigabyte.com.tw/support/temp ... xe_f3a.zip

The Celeron 600 CPU has multiplier 9x (can't be changed) and should be set to 66MHz FSB. The vcore voltage is 1.5V to 1.75V depending on CPU type.
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
yhnl4
New visitors - please read the rules.
Posts: 13
Joined: Sat Nov 09, 2002 7:54 am
Location: Australia
Contact:

i just download a lil program(at www.celeron.com) that tells me the frequency i'm using and what frequency i shoulb be at. It turns out i should set my fsb at 133mhz with the multiplier of 4.5 which solved the problem. According to my retarted manual, it says i should set 100mhz fsb with X6 for celeron 600mhz

sorry for your inconvient and thanks for replying ^^
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

133MHz? That's NOT Celeron CPU but Pentium III :!:
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
Post Reply