This motherboard
http://h10025.www1.hp.com/ewfrf/wc/docu ... 567#N1000C
Should be jumperable for 400mhz 66x6 with an amd k6-2 and it is jumperable for 5.5x66 but I cannot find any mention of how to jumper the unit for 2.2 or thereabouts voltage.
This board looks like a TX98 but I can't seem to find voltage jumpers for that either.
Also what jumper combinations give 75mhz or 83mhz? It looks as if I can do by the guess and check method but I list would be nice (yes I know overclocking).
And while I'm at it can the bios support a plain k6 /k6-2 processor?
Thanx for your continued help
Ryan
Stupid question Hp Pavilion 8240 D6404A how do I get 2.2v?
-
- BIOS Guru
- Posts: 3153
- Joined: Thu Mar 21, 2002 8:16 pm
- Location: Near Hannover (CEBIT) Germany
- Contact:
Check your motherboard surface - if it's really an Asus board than maybe something like TX98-XV.
Asus has some unofficial jumpersettings for lower Voltages and higher FSB in their official FAQ for the TX97/TX98 series(without directly supporting your OEM mainboard)
Asus has some unofficial jumpersettings for lower Voltages and higher FSB in their official FAQ for the TX97/TX98 series(without directly supporting your OEM mainboard)