Stupid question Hp Pavilion 8240 D6404A how do I get 2.2v?

Don't ask how to over-clock.
Post Reply
rmay635703
Chip off the ol' block
Posts: 68
Joined: Thu Apr 04, 2002 6:25 pm

This motherboard

http://h10025.www1.hp.com/ewfrf/wc/docu ... 567#N1000C

Should be jumperable for 400mhz 66x6 with an amd k6-2 and it is jumperable for 5.5x66 but I cannot find any mention of how to jumper the unit for 2.2 or thereabouts voltage.

This board looks like a TX98 but I can't seem to find voltage jumpers for that either.

Also what jumper combinations give 75mhz or 83mhz? It looks as if I can do by the guess and check method but I list would be nice (yes I know overclocking).

And while I'm at it can the bios support a plain k6 /k6-2 processor?

Thanx for your continued help
Ryan
Denniss
BIOS Guru
Posts: 3153
Joined: Thu Mar 21, 2002 8:16 pm
Location: Near Hannover (CEBIT) Germany
Contact:

Check your motherboard surface - if it's really an Asus board than maybe something like TX98-XV.
Asus has some unofficial jumpersettings for lower Voltages and higher FSB in their official FAQ for the TX97/TX98 series(without directly supporting your OEM mainboard)
Post Reply