Also tried disconnecting one HDD and just having the old one in... no effect. Tried same thing with newer HDD... no effect. i'm lost.
Search found 3 matches
- Thu Feb 16, 2006 4:32 am
- Forum: My hard drive isn't recognized
- Topic: Updated BIOS, now cant see ANYTHING
- Replies: 3
- Views: 3470
A Note
Oh, and I did use Jumper JP4 to wipe out the CMOS data after flashing... no effect.
Also tried disconnecting one HDD and just having the old one in... no effect. Tried same thing with newer HDD... no effect. i'm lost.
Also tried disconnecting one HDD and just having the old one in... no effect. Tried same thing with newer HDD... no effect. i'm lost.
- Thu Feb 16, 2006 4:30 am
- Forum: My hard drive isn't recognized
- Topic: Updated BIOS, now cant see ANYTHING
- Replies: 3
- Views: 3470
Updated BIOS, now cant see ANYTHING
Hi there, I updated my Award Modular Bios from the 2000 to 2001 version because I could not use a 7.5GB WD harddrive and thought this was a good bet. Unfortunately, now I cant see the old 1.5GB drive or even the CDROMs! I had backed up the old BIOS before flashing with UniFlash, so I went back to th...
