64MB PCI Graphiccards

Only for programmers and BIOS gurus with technical questions.
Post Reply
janpopan
Chip off the ol' block
Posts: 82
Joined: Tue Apr 02, 2002 10:08 pm
Location: Berlin
Contact:

Hi all!
I read in different NG (asus) and forums(ga586hx.de) that 64MB PCI graphiccard are not supported by some HX Boards (maybe other boards too).
I heard also there is a Bug in the BiosCore, the Bios could not initialize the framebuffer.

Or is this a problem with real hardware voltages, regulators ..?



Any informations by anybody?

regards janpopan
for 32 GB+ Bios look here

http://www.jan-hill.com/bios.html
janpopan
Chip off the ol' block
Posts: 82
Joined: Tue Apr 02, 2002 10:08 pm
Location: Berlin
Contact:

Again,

I recived an e-mail (german)

habe Problem mit meinem GA586TX3 Board.

Meine neue Grafikkarte (ATI RADEON 7500, 64 MByte DDR RAM, PCI 2.1) will
von meinem BIOS nicht erkannt werden.
Nach dem Computerstart gibt mein Computer nur 2 Piepstöne von sich :-((


GA586TX3 did not work with a ATI RADEON 7500, 64 MByte DDR RAM, only 2 short beeps. Other Graphiccards work.

Could it be a Bios Problem or is this a Hardwareproblem (low voltage on the Board)

Ideas?

Janpopan
for 32 GB+ Bios look here

http://www.jan-hill.com/bios.html
janpopan
Chip off the ol' block
Posts: 82
Joined: Tue Apr 02, 2002 10:08 pm
Location: Berlin
Contact:

And some news from the asus NG

Not quite the same, but my TX97-XE will work with a 64 MB PNY GF2 MX400. It will not however work with any 64 MB GF4 MX or any 64 MB Radeon 7500.

The difference I could see between the the various 64 MB cards was that the GF2 MX400 had 8 8MB chips, the GF4 MXs had 4 16MB chips, and the Radeon 7500s had 2 32MB chips. I'm not sure why that would make a difference, but it's a possibility I guess.

George

Max Attar Feingold wrote:

> Has anyone managed to get a T2P4 running with any kind of 64MB PCI video
> card, except a Voodoo5?
>
> Google groups has some success stories with GF2 MX cards with 32 MB of
> RAM, but none with 64MB. I'd like to pick up a GF4 MX with 64MB to
> upgrade a T2P4 machine to play older 3D games, but it doesn't look like
> it's going to work...
>
> Is there anyone out there with some positive news?
>
> Max Attar Feingold
> maf6 at cornell dot edu
> http://almonaster.sourceforge.net/mfeingol/
>
> Not speaking for my employer

MfG
Jan
for 32 GB+ Bios look here

http://www.jan-hill.com/bios.html
NickS
BIOS Bodhisattva
Posts: 3145
Joined: Fri May 03, 2002 10:34 am
Location: Thames Valley, UK

Looks as though there are possibly multiple issues;
GF2 vs GF4/Radeon
32MB vs 64 MB

Has anyone tried one of these PCI boards as a secondary device in a board with an AGP primary display ?
georgep
BIOS Rookie
Posts: 39
Joined: Sat May 11, 2002 10:07 pm

The post to the ASUS newsgroup on the TX97-XE was mine.

I did not try the PCI card as a 2ndary card in an AGP system. I did try them as the primary display device in a an AGP capable Super7 motherboard (Epox MVP3G5) to see if they were okay, and they worked fine.

Both systems had 350W power supplies.
janpopan
Chip off the ol' block
Posts: 82
Joined: Tue Apr 02, 2002 10:08 pm
Location: Berlin
Contact:

Some facts:

GA 586 TX3 Bios-Date 08/14/1998
Asus TX97-XE Bios-Date 11/24/1998
Epox MVP3G5 Bios-Date 12/21/2000

I have only the code for Award 1999 (i810), in the source I have no found a Bugreport, but I searched not so long :-)

And:

Gigabyte has special Bios version for their own Graphiccard:
http://tw.giga-byte.com/home/sw400agp.htm

MfG

Jan
for 32 GB+ Bios look here

http://www.jan-hill.com/bios.html
Post Reply