BIOS Updates forum

I would try going back to nvidia's website, and e-mailing their tech support; explain to them what you are looking for, and they should be able to help you; follow the link below and click on the "ask a question" tab at the top; I hope this helps http://nvidia.custhelp.com/cgi-bin/nvidia.cfg/php/end...

cp, thanks for your post and help in this matter.... I did find "sdram cas latency" listed in the advanced chipset setup, and I have it set to auto; I went thru the motherboard manual and changed all settings in the bios as to what it says are the optimal settings; the cas latency setting was not li...

thanks for the sites; I am not sure exactly what you are saying I should look at; sorry if I am sounding kinda dumb here, maybe I am not as smart with this as I thought

I have no idea how to change the ram timings, didn't know it could be done; the ram I am using is all the same...3 sticks of pc100 32mb

yes, did that more than once actually; it doesn't make sense to me; it worked fine with the other board, so it should work with this one; the only thing I can think of is the drive controllers are messed up, and I have no idea what to do about that, if anything can be done; thanks for your post

I would like to install the MS-5169 383Beta.zip bios update on my board, but I have one problem......I cannot boot from a floppy disk; the floppy drive was working before I switched motherboards I updated the bios to version 3.3 by forcing the install by holding down the "ctrl" and "home" keys upon ...