BIOS Updates forum

Ive thought about opening each bios file in the hex editor and copying the code from one to the other, but I am not sure where to put it in the as8 file. Im sure that if i just copied it to the same offset as in the al8 bios, it would be wrong. can you tell me where the cpu code starts and ends in t...

I followed your instructions, and using winhex, I was able to extract the cpu code to a 47kb bin file. When i try to add it however, using /nc_cpucode with cbrom32, it appears to just erase the bin file out of the bios. Here is before. ******** as8_18.bin BIOS component ******** No. Item-Name Origin...

I was thinking that maybe i could take the ncpucode.bin out of the al8 bios and put it in the as8 bios, but i cant figure out how to get cbrom32 to extract ncpucode.bin from the bios file. How do I do this?

Well, I downloaded the AS8 and the AL8 bios files and found both cbrom and cbrom32, but I cant seemt o get it to work. It tells me that there is no cpucode file in the bios. It seems both utilities have a lot of options for adding things, but I cant figure out how to get stuff out. I tried searching...

Ive got my 506 prescott @ 4.3ghz stable with no problems, so i would think it could handle a dual core. I havent received the cpu yet, but im pretty sure it wont post.

I currently have an Abit AS8(865PE Chipset) with a P4 506 in it. I have an 805 on the way that I would like to run in it until i get a new board, but I know the AS8 wont boot if it doesnt recognize the cpu, because when i first got this board, i had to use an old 520 cpu to flash the bios before the...