Bios doesnt remember CPU Speed..plz read

BIOS Questions that don't belong in the other forums. Read them!
Post Reply
t3kjunky
New visitors - please read the rules.
Posts: 1
Joined: Thu May 02, 2002 8:44 am

when i boot up my comp.. it says "plz reselect cpu speed". when i select the cpu speed. press f10 and exit..it again gives the same error.but when i enter the bios setup screen and make no changes i.e do not select the speed. and simply exit..the computer boots normally.this happens everytime i boot my comp.please help me on this.
ajzchips
El cheapo dude
Posts: 3048
Joined: Sat Mar 23, 2002 12:41 pm
Location: Madrid, Spain

Sounds like your battery needs replacing.
xiaonian
Master Flasher
Posts: 167
Joined: Fri Apr 26, 2002 5:29 am
Location: HEZE P.R.China
Contact:

if not, you should check if your CPU is a remark one or not;
or if you use a SLOT-370 card With your cpu, pls try a new card.
chevy LUV (light utility
New visitors - please read the rules.
Posts: 4
Joined: Sat May 25, 2002 1:43 pm

One is a (p5i430tx titanium I B) and a (p5i430vx/250DM explorer II ) boards that support p75-233mmx. one I thought had the jumper set to clear the bios, so I jumpered it and burned two traces on the board. before this it would drain a battery in 3 days.
the other board had a cpu fan that went bad and overheated a power transistor that supplies the cpu Vss. now it takes longer for it to ramp up the vss (starts at 1.75~) to get to 2.87~ volts.
test cpu is a p166 mmx 2.8v.
no hurry, every 3 months I pull these boards back out and scratch my head some more.
Post Reply