BIOS Fail-status

BIOS Questions that don't belong in the other forums. Read them!
Post Reply
bozicaleksandar
New visitors - please read the rules.
Posts: 3
Joined: Fri Dec 11, 2009 10:36 pm

Hello,My name is Aleksandar and I have the problem with BIOS.
When I put at BIOS "Load with optimized value" computer restart and then black screen appears,hard disk stop working and can run windows xp OS.When I put in BIOS "Load with Fail value" computer restart run with Win XP normally,but no sound(can hear sound at my speakers)-Everything is OK,ut when I play music, player works,but no music to hear.Please help me,I think that I must set something in BIOS.
Thank you very much.
Aleksandar.
Denniss
BIOS Guru
Posts: 3153
Joined: Thu Mar 21, 2002 8:16 pm
Location: Near Hannover (CEBIT) Germany
Contact:

It sounds like the loaded optimal settings change a required setting to a wrong one. Typical problem setting are memory speed, timings or voltage. Other option would be the SATA operation mode (if SATA is in use).
Do you use SATA drives? If yes then please check the operation mode. If set to AHCI in Bios try IDE mode (or whatever it's called).
Please verify your memory uses the voltage it's specified for (especially if you have some of the super-duper OCZ etc modules often requiring way more voltage than standard modules).
Post Reply