BIOS Problem

BIOS Questions that don't belong in the other forums. Read them!
Post Reply
robertw2
New visitors - please read the rules.
Posts: 1
Joined: Thu Jan 23, 2003 2:35 pm

I recently built a new computer. It has Gigabyte motherboard GA-7VKMLS

Rev 3.0 with VIA KM266 AGPset and has 98 SE installed. The BIOS is AMI

BIOS, 2M bit Flash ROM. It has Voodoo3 2000 PCI video card with 16 MB

SDRAM Memory. The machine has worked excellently until I changed VGA

Boot from PCI to AGP in PNP/PCI Configuration section of the BIOS. Now

when computer is turned on screen is blank and no POST is displayed.

Tested monitor and video card with another computer and both work fine.

How do I get my POST screen and change my settings? Any ideas or

suggestions would be appreciated. Thanking you in advance.
soupy
Absentee administrator
Posts: 1086
Joined: Thu Mar 21, 2002 1:06 am
Location: Ontario, Canada
Contact:

Is there onboard VGA? Use it.
Flash your BIOS at your own risk.
Post Reply