CMOS settings and Cmos display type wrong.f2 and f1 no respo

BIOS Questions that don't belong in the other forums. Read them!
Post Reply
henry
New visitors - please read the rules.
Posts: 1
Joined: Fri Sep 15, 2006 2:39 pm

Hi guys i urgently need help(detailed).
when i put on my machine(hewlett packard vectra), a light blue screen comes up with hp and vectra logos and then MY PROBLEM OCCURS.
PROBLEM

A black screen with

Wait........
CMOS settings wrong
Cmos display type wrong

press f2 torun setup
press f1 to load default values and continue


Now i have tried some help but to no avail.THe most disturbing thing is that pressing both f2 and f1 results in no response.

please help me.
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

power down, replace the CR2032 coin cell 3V lithium ion battery. Try again.
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Post Reply