Help with slow bootup in ASrock 939-dual

BIOS Questions that don't belong in the other forums. Read them!
Post Reply
nocrapman
New visitors - please read the rules.
Posts: 3
Joined: Mon Mar 06, 2006 6:46 pm

It takes forvever for machine to start-up. The Bios screen stays for a long time... so does the blank-black screen after that. Once the windows logo falshes -its very zippy after that - 10 secs maybe. I have fixed the RAM issue in the BIOS. Other than this and the fact that I get very low scores in 3dmark06 - (500 or so overall)... the machine runs fine and cool at around 30-32C.
ALso I was told by someone to clear the CMOS since I had never done that. Will that resolve the issue? Do I put the jumpers back to their original position after that boot up... or do they stay in their new position.

Oh by the way I am running ver 1.5 of the BIOS, so I dont think I need to update the BIOS.
Any helpful hints/suggestions would be highly appreciated.
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

WD drive is only drive on cable and set for master? Wrong, set it for single drive.
edwin/evasive

Do not assume anything

System error, strike any user to continue...
nocrapman
New visitors - please read the rules.
Posts: 3
Joined: Mon Mar 06, 2006 6:46 pm

Whats single drive? A jumper setting?
Yes its the only drive on the cable and set on master.
Post Reply