Intel D865glc Bios Now Appear Hyper Thread Technology

BIOS Questions that don't belong in the other forums. Read them!
Post Reply
DON IS BACK
New visitors - please read the rules.
Posts: 3
Joined: Tue Jul 26, 2011 5:35 pm

Hi Dear Friends i hope you are all fine..!
i have three questions..!
!st is:
Friends i am using Unbranded System..!
and My Motherboard name is Intel intel d865 glc/peso/prc
My Motherboard cannot show Hyper Thread Technology option in Bios
My Processor is Original Intel Pentium 4 (2.6)
i wana show Hyper Thread Technology In My Motherboard..!
i too many search in my motherboard bios but i cannot see like this option...!
I see many branded system (Dell,IBM,HP) that have intel d865 glc/peso/prc motherboard and Intel Pentium 4 Original Processor,,but he show Hyper Thread technology option in bios...

2nD is: My motherboard intel d865 glc/peso/prc is original Intel Motherboard But When i start my computer then during Bios he Appear RM Logos...!
i will update my motherboard bios to 2005 but problem not solve and RM Logo still appear on my Computer During Starting bios

3rd: how can i upgrade my intel d865 glc/peso/prc motherboard Bios to Dell,IBM,HP,Bios?

Pls Help Me thx
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

There are 2 different 2.6GHz Pentium 4 processors.

One with 400MHz FSB:
http://ark.intel.com/products/27442

One with 800MHz FSB:
http://ark.intel.com/products/27494

The 800MHz FSB variant is used in the Dell/HP/IBM systems, your box which is very budget most likely, is using the older 400MHz FSB which does NOT support HT. So, it is not a bios problem, you just have a processor that has no HT in it.
edwin/evasive

Do not assume anything

System error, strike any user to continue...
DON IS BACK
New visitors - please read the rules.
Posts: 3
Joined: Tue Jul 26, 2011 5:35 pm

ok thx for reply
but i used intel pentium 2.6ghz 800 bus speed prcoessor but Hyper Threading Technology option not appear in bios and problem is same
also tell me how can i show intel original logo during started computer,,currently RM Company logo appear during started computer
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

Dear Sir,

Your system motherboard was delivered by this company, please contact them for further support:
http://www.rmeducation.com/uk/

This is NOT a retail board from Intel so there is NO support from Intel and you can NOT flash the Intel bios on this board.
edwin/evasive

Do not assume anything

System error, strike any user to continue...
DON IS BACK
New visitors - please read the rules.
Posts: 3
Joined: Tue Jul 26, 2011 5:35 pm

But Sir Intel all original Drivers (VGA,Sound,LAN) install correcntly on my motherboard

but only problem is that DUring bios appear RM Logo

give me any way or solution through which i will change my board logo
cp
BIOS Guru
Posts: 1914
Joined: Mon Oct 21, 2002 9:07 pm
Location: Germany

Download CPU-Z and report back with its output.

The Intel drivers will install fine on your motherboard - just like on any other motherboard that uses an Intel chipset - because it uses an Intel chipset! It doesn't mean that Intel supplied anything else but the chipset for the motherboard.
If you email me include [WIMSBIOS] in the subject.
Post Reply