Thanks!
René
Search found 12 matches
- Sun Feb 18, 2007 8:51 pm
- Forum: RAM compatibility with BIOS
- Topic: Gigabyte GA-586TX3 and more than 256MB?
- Replies: 2
- Views: 5020
- Sun Feb 18, 2007 12:22 am
- Forum: RAM compatibility with BIOS
- Topic: Gigabyte GA-586TX3 and more than 256MB?
- Replies: 2
- Views: 5020
Gigabyte GA-586TX3 and more than 256MB?
Hi! I have a Gigabyte GA-586TX3 (latest BIOS 2.1) with 430TX chipset and 3 DIMM slots and 2 SIMM slots. The manual says I can install 256MB RAM (2 x 128MB SIMMs). Currently, I have one 256MB Dimm in the DIMM 1 slot installed, and the board functions great, even though the manual says it can only sup...
- Thu Feb 15, 2007 10:51 pm
- Forum: My hard drive isn't recognized
- Topic: 128GB BIOS for MS-5156 (TX4) needed
- Replies: 15
- Views: 10059
- Thu Feb 15, 2007 9:14 pm
- Forum: My hard drive isn't recognized
- Topic: 128GB BIOS for MS-5156 (TX4) needed
- Replies: 15
- Views: 10059
The drive (we are talking about the 2,1GB here, not my 32GB "problem") has three jumpers: 5-6 closed: master or standalone all open: slave 3-4 (middle): cable select 3-4 and 5-6 closed: master with non ATA slave It is installed as a single drive and thus 5-6 is closed. The cable is a short standard ...
- Thu Feb 15, 2007 5:01 pm
- Forum: My hard drive isn't recognized
- Topic: 128GB BIOS for MS-5156 (TX4) needed
- Replies: 15
- Views: 10059
- Thu Feb 15, 2007 12:54 pm
- Forum: My hard drive isn't recognized
- Topic: 128GB BIOS for MS-5156 (TX4) needed
- Replies: 15
- Views: 10059
I have installed a 40GB HDD with a 32GB clip in another PC that had this problem, and LINUX did *not* detect it as 40GB, but 32GB. I thought this was normal. no. that's not normal. I am using a 2.4.X kernel. kernels 2.4.18 and upward support LBA48. make sure you're using a recent kernel and all you...
- Thu Feb 15, 2007 8:10 am
- Forum: My hard drive isn't recognized
- Topic: 128GB BIOS for MS-5156 (TX4) needed
- Replies: 15
- Views: 10059
OT
Yes, I know. But as you mentioned above the problem with some boards is, that they do not even boot when a HDD bigger than 32GB is installed. I have installed a 40GB HDD with a 32GB clip in another PC that had this problem, and LINUX did *not* detect it as 40GB, but 32GB. I thought this was normal. ...
- Wed Feb 14, 2007 11:38 pm
- Forum: My hard drive isn't recognized
- Topic: 128GB BIOS for MS-5156 (TX4) needed
- Replies: 15
- Views: 10059
Just wanted to tell that I just got this DMA error with the unpatched 1.2 BIOS. Seems the HDD *is* broken. Interesting that the error *always* occurs with BIOS 1.4+ and *sometimes* with 1.2 and perhaps 1.1. I have just flashed the patched 1.1 and got no problems. Auto detection reported zero size, s...
- Wed Feb 14, 2007 8:32 pm
- Forum: My hard drive isn't recognized
- Topic: 128GB BIOS for MS-5156 (TX4) needed
- Replies: 15
- Views: 10059
Hi! Well, I have had mixed feelings with the update and the whole "BIOS story". First, the good part: The patched BIOS booted, the HDD auto detection reported zero size for my old 2,1GB HDD, but the startup screen reported the correct 2112MB. Now to the bad part: The installed LINUX booted much slow...
- Wed Feb 14, 2007 8:16 am
- Forum: My hard drive isn't recognized
- Topic: 128GB BIOS for MS-5156 (TX4) needed
- Replies: 15
- Views: 10059
- Tue Feb 13, 2007 7:04 pm
- Forum: My hard drive isn't recognized
- Topic: 128GB BIOS for MS-5156 (TX4) needed
- Replies: 15
- Views: 10059
128GB BIOS for MS-5156 (TX4) needed
Hello! I have an older Super Socket 7 - Mainboard from MSI, and need a 64GB or even better 128GB patch for my BIOS. The Mainboard is a MS-5156 (TX4)-Mainboard you can find some more info at http://www.msi-computer.de/produkte/main_idx_view.php?Prod_id=73&Seite=BIOS (german site with beta BIOS) or ht...