10GB: 1.00.07.BC0R

BIOS update, EIDE card, or overlay software? (FAQ Hard disk recognition)
Post Reply
Zorowski
New visitors - please read the rules.
Posts: 4
Joined: Thu Jul 04, 2002 10:49 pm

Hi,

I would really appreciate it if anyone could help me locate a bios
upgrade for a Packard Bell Legend 100CD with an Ami Bios on an Intel
board.

Bios: 1.00.07.BC0R
Ami Bios 1992

Intel board: Premiere /PCI LC Low Profile
Codename: Robin LC

The current bios will not recognize the 10 gig HD unless it is set to only 504MB.

Thank you for you help.

Regards,

A. Zorowski
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

Your BIOS is newer than the latest one from Intel (1.00.06.BC0).
Use add-on PCI EIDE controller with own BIOS or drive overlay software.
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
Zorowski
New visitors - please read the rules.
Posts: 4
Joined: Thu Jul 04, 2002 10:49 pm

Hi Rainbow,

Thank you for your help!

What is drive overlay software and is it readily available?

Thank you again.

A. Zorowski
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

You can download it from your HDD manufacturer.
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
Post Reply