120GB: 08/02/1999-i810-47B27X-6A69MF09C-00

BIOS update, EIDE card, or overlay software? (FAQ Hard disk recognition)
Post Reply
perake
New visitors - please read the rules.
Posts: 4
Joined: Tue Aug 21, 2007 9:29 am

FIC motherboard CW33
Award bios V6.00PG
Version VB412

It doesnt recognize the HDD
Any tip ?

/Perake
Denniss
BIOS Guru
Posts: 3153
Joined: Thu Mar 21, 2002 8:16 pm
Location: Near Hannover (CEBIT) Germany
Contact:

http://www.fic.com.tw/support/motherboa ... odel_id=58

The VB415 Bios is what you are searching
perake
New visitors - please read the rules.
Posts: 4
Joined: Tue Aug 21, 2007 9:29 am

Thanks info.
But VB412 is PCB Ver. 1.1 and VB415 is PCB Ver 1.2 .
Are you sure that VB415 works ok then ?

/PerAke
Denniss
BIOS Guru
Posts: 3153
Joined: Thu Mar 21, 2002 8:16 pm
Location: Near Hannover (CEBIT) Germany
Contact:

Hmmm, FIC usually has different letters in Bios version if Bios are intended to be used on a specific PCB revision. Using VB41x in all Bios versions might indicate it is working on all CW33 PCB version. If diferent PCB requires diferent Bios they would have used vb for PCB 1.0, Vc for 1.1 and VD for 1.2 (or a similar numbering system).

Is there any chance to contact FIC tech support about this issue?
perake
New visitors - please read the rules.
Posts: 4
Joined: Tue Aug 21, 2007 9:29 am

Sent e-mail to FIC 2 days ago, but no reply yet.
See if Ill try that VB415 .
perake
New visitors - please read the rules.
Posts: 4
Joined: Tue Aug 21, 2007 9:29 am

Upgrade to VB415 worked ok, with HDD 120GB WD1200.
It also solved a problem with the USB.
Thanks tip.
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

Denniss wrote:Hmmm, FIC usually has different letters in Bios version if Bios are intended to be used on a specific PCB revision. Using VB41x in all Bios versions might indicate it is working on all CW33 PCB version. If diferent PCB requires diferent Bios they would have used vb for PCB 1.0, Vc for 1.1 and VD for 1.2 (or a similar numbering system).

Is there any chance to contact FIC tech support about this issue?
This is NOT true for their VC35 board. iee43 works on both 1.1 and 1.2, iee44 only on 1.2 PCBs. So not a general rule of thumb...
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Post Reply